ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 158

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
}
/******************************************************************************
Use of TimebaseInterrupt service routine
- User has to write this function and map the interrupt vector in .prm file in
- An example of LED toggles after every 5 seconds is given.This routine is
- This gets automatically executed when TBF interrupt of the LT is enabled. If
Functions description
- The lt_hr.h is to be included when the actual hardware register are read to
******************************************************************************/
#ifdef _HIWARE_
#pragma TRAP_PROC SAVE_REGS
#else
#ifdef _COSMIC_
@interrupt @nostack
#else
#error "Unsupported Compiler!"
#endif
#endif
void LT_TB_IT_Routine(void)
{
}
158/235
case of HIWARE or in vector_xxx.c in case of COSMIC.
executed when overflow occurs (TBF=1).
the same functions are called in the main Tree and the interrupt Tree, the
function Reentrant error occurs in case COSMIC compiler is used with models
other than stack models.
clear the flags.For configuring the port pins, I/O library is used.
}
IO_Write (IO_PORT_B,IO_PIN_1,IO_DATA_LOW);
unsigned char Temp;
/* i = LTCSR; Clear ICF */
LT_Clear_Flag(LT_FLAG_TBF);
count++;
if(count == 5000)
{
}
/* Routine up to the user */
Temp = IO_Read (IO_PORT_B );
if (Temp & 0x08)
{
}
else
{
}
count = 0;
IO_Write (IO_PORT_B,IO_PIN_3,IO_DATA_LOW);
IO_Write (IO_PORT_B,IO_PIN_3,IO_DATA_HIGH);
/* Additional registers will be saved */
/* Compiler Defines not found! */
/* Test for HIWARE Compiler */
/* Test for Cosmic Compiler */
/* Call only to clear TBF */
/* Turn OFF LED at PB1 */
/* Turn OFF LED at PB3 */
/* Turn ON LED at PB3 */
/* TO Toggle PB3 */