ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 50

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
– If a reception request for a set of data is over, this function will return the error status of that
– In Polling mode, this function is used in conjunction with SCIx_GetByte only.
Table 25. SCIx_Forced_Clear_Flag
Note: You can call this function whenever you want to force the error and status flags be
Caution: Do not call this function if a reception request is ongoing as it will corrupt the recep-
Table 26. SCIx_IT_Function
Note: Only use this function in the Interrupt service routine.
Caution: Special care must be taken, while you write your own code along with this function
50/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions.
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions.
Functions called
Postconditions
See also
request only once. If this function is called again (before making next reception request), then
the function will check for single byte reception.
cleared.
tion status by clearing all the flags and you will not receive any error status.
in the interrupt service routine, otherwise, data transfer synchronisation could be affected,
which may lead to data corruption.
Void SCIx_Forced_Clear_Flag(void)
Clears all the status and Error flags (TC, TDRE, RDRF,
IDLE, OR, NF, FE, PE) in SCI Status register(SCISR).
None
None
Transmission or Reception must have taken place.
None
None
None
SCIx_IT_Function
Void SCIx_IT_Function (void)
Transmits or receives data in Interrupt driven mode. You
must call this function inside the interrupt service routine.
None
None
You must have called transmission or reception function in
Interrupt driven mode.
None
Communication is started inside the interrupt subroutine.
None
SCIx_Forced_Clear_Flag