ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 195

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EXAMPLE:
The following C program shows the use of the WDG library functions.
Program description:
This program generates the watchdog reset for ST72F521 device. The reset timeout period is
configured as 34ms with fosc2 = 8MHz, through function WDG_Refresh with input parameter
“Counter_Data” as 0x50 (See
Watchdog reset timeout can also be configured through WDG_ComputeTimeout function
(refer to the example below). Here it is configured for a reset timeout of 20,000µs with input
parameter WDG_Timeout given as 20,000.
In Window Watchdog, the reset can be generated by reloading the WDG counter register out-
side the Window. In the example it is generated after 1ms
/******************************** Program Start **********************************/
#include "ST7lib_config.h"
void main(void);
void main (void)
{
}
unsigned int i;
/*-----------------------------------------------------------------------------
-----------------------------------------------------------------------------*/
WDG_Refresh (0x50);
/*-----------------------------------------------------------------------------
-----------------------------------------------------------------------------*/
/*WDG_ComputeTimeout (50000); */
/*----------------------------------------------------------------------------
-----------------------------------------------------------------------------*/
#ifdef WDG_72F561
WDG_Refresh(0x50) ;
WDG_WriteWindow(0x48)
for (i = 0; i < 532; i++) ;
WDG_Refresh(0x50);
#endif
while (1);
WDG_Refresh function to generate a reset after 34ms at fosc2 = 8MHz
WDG_ComputeTimeout function to generate a reset after 20ms (MCC timebase:
4ms, fosc2 = 8MHz)
Window
18.432ms at fosc2 = 8MHz. Reset is generated after 1ms by reloading the WDG
counter register outside the window.
Watchdog for setting a Refresh Period of 34ms and a Window Size of
Table
141).
/* Generates Reset on execution of this routine */
/* Set a Refresh period of 34ms */
/*Generates reset after 34ms*/
/*Generates reset after 20ms*/
Function Descriptions
/*1ms delay */
195/235