ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 120

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
/******* end of polling mode ******************************/
/******** INTERRUPT DRIVEN MODE *************************************/
!= I2Cs_OVERFLOW_TX)))
I2Cs_OVERFLOW_TX))
/****************END OF INTERRUPT DRIVEN MODE *******************/
/***********************************************************/
/******* RECEIVER ROUTINE ******************/
!= I2Cs_GENERAL_CALL)))
120/235
}
Error_Status=I2Cs_IsReceptionCompleted();
while((!(Time_Out()))&& ((Error_Status != I2Cs_ADDRESS_DETECTED) && (Error_Status
{
}
#endif
#ifdef I2C_ITDRV_WITHOUTBUF_TX
I2Cs_PutBuffer(Buff_Out,maxsize);
Error_Status=I2Cs_IsTransmitCompleted();
while((!(Time_Out())) && ((Error_Status != I2Cs_TX_DATA_OK) && (Error_Status
{
}
switch( Error_Status)
{
}
#endif
Error_Status=I2Cs_IsReceptionCompleted();
Error_Status=I2Cs_IsTransmitCompleted();
case I2Cs_BUFF_TX_ONGOING:
case I2Cs_TX_DATA_OK:
case I2Cs_OVERFLOW_TX:
case I2Cs_TX_AF:
case I2Cs_BERR:
case I2Cs_GENERAL_CALL:
case I2Cs_ADDRESS_DETECTED:
case I2Cs_DEFAULT_STATUS:
default:
break;
Error_Status=I2Cs_IsTransmitCompleted();
while((Error_Status != I2Cs_TX_DATA_OK) && (Error_Status !=
{
}
break;
User_Function();
break;
User_Function();
break;
break;
Error_Status=I2Cs_IsTransmitCompleted();