SAK-TC1736-128F80HL AA Infineon Technologies, SAK-TC1736-128F80HL AA Datasheet - Page 33

• Manufacturer Part Number: SAK-TC1736-128F80HL AA
• Description: IC MCU 32BIT 1MB FLASH 144LQFP
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1736-128F80HL AA

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: ASC, CAN, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 70
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-LFQFP
• Packages: PG-LQFP-144
• Max Clock Frequency: 80.0 MHz
• Sram (incl. Cache): 48.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 24
• Program Memory: 1.0 MB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2.4.7
The data overlay functionality provides the capability to redirect data accesses by the
TriCore to program memory (internal Program Flash or external memory) to the Overlay
SRAM in the PMU, or to the Emulation Memory in Emulation Device ED. This
functionality makes it possible, for example, to modify the application’s test and
calibration parameters (which are typically stored in the program memory) during run
time of a program. Note that read and write data accesses from/to program memory are
redirected.
Attention: As the address translation is implemented in the DMI, it is only effective
Summary of Features and Functions
•
•
•
•
•
•
•
•
Data Sheet
16 overlay ranges (“blocks”) configurable for Program Flash and external memory
Support of 4 Kbyte embedded Overlay SRAM (OVRAM) in PMU
Support of up to 256 Kbyte overlay/calibration memory in Emulation Device (EMEM)
Support of Online Data Acquisition into range of up to 32 KB and of its overlay
Support of different overlay memory selections for every enabled overlay block
Sizes of overlay blocks selectable from 16 byte to 2 Kbyte for redirection to OVRAM
Sizes of overlay blocks selectable from 1 Kbyte to 128 Kbyte for redirection to EMEM
All configured overlay ranges can be enabled with only one register write access
Data Access Overlay
for data accesses by the TriCore. Instruction fetches by the TriCore or
accesses by any other master (including the debug interface) are not
affected!
29
Introduction
V1.1, 2009-08
TC1736