NHPXA270C5C520 Intel, NHPXA270C5C520 Datasheet - Page 120

• Manufacturer Part Number: NHPXA270C5C520
• Description: IC MPU 32BIT 520MHZ 356-PBGA
• Manufacturer: Intel

Specifications of NHPXA270C5C520

• Processor Type: XScale®
• Speed: 520MHz
• Voltage: 1.45V
• Mounting Type: Surface Mount
• Package / Case: 356-PBGA
• For Use With: 460-3472 - KIT DEV ZOOM STARTER FOR PXA270
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: 868459

Intel® PXA270 Processor
Glossary
Port: Point of access to or from a system or circuit. For the USB, the point where a USB device is attached.
Power On Reset (POR): Restoring a storage device, register, or memory to a predetermined state when power is
applied.
Process ID: Process identifier
Programmable Data Rate: Either a fixed data rate (single-frequency endpoints), a limited number of data rates
(32 kHz, 44.1 kHz, 48 kHz, …), or a continuously programmable data rate. The exact programming capabilities of
an endpoint must be reported in the appropriate class-specific endpoint descriptors.
Protocol: A specific set of rules, procedures, or conventions relating to format and timing of data transmission
between two devices.
PSP: Programmable Serial Protocol
PWM: Pulse Width Modulator
QBS: Qualification By Similarity. A technique allowed by JEDEC for part qualification when target parameters are
fully understood and data exist to warrant omitting a specific test.
QAM: quadrature amplitude modulation. A coding scheme for digital data.
QPSK: quadrature phase shift keying. A convention for encoding digital data into a signal using phase-modulated
communications.
RA: See rate adaptation.
Radio Frequency Device: These devices use radio frequencies to transmit data. One typical use is for bar code
scanning of products in a warehouse or distribution center, and sending that information to an ERP database.
Rate Adaptation: The process by which an incoming data stream, sampled at Fs i, is converted to an outgoing data
stream, sampled at Fs o, with a certain loss of quality, determined by the rate adaptation algorithm. Error control
mechanisms are required for the process. Fs i and Fs o can be different and asynchronous. Fs i is the input data rate
of the RA; Fs o is the output data rate of the RA.
Request: A request made to a USB device contained within the data portion of a SETUP packet.
Retire: The action of completing service for a transfer and notifying the appropriate software client of the
completion.
RGBT: Red, Green, Blue, Transparency
ROM: Read Only Memory.
Root Hub: A USB hub directly attached to the Host controller. This hub (tier 1) is attached to the host.
Root Port: The downstream port on a Root Hub.
RTC: Real-Time Clock
*
SA-1110: StrongARM
based applications processor for handheld products
Intel® StrongARM* SA-1111: Companion chip for the Intel® SA-1110 processor
SAD: Sum of absolute differences
Glossary-10
Electrical, Mechanical, and Thermal Specification