SC16C850VIBS,128 NXP Semiconductors, SC16C850VIBS,128 Datasheet - Page 33

• Manufacturer Part Number: SC16C850VIBS,128
• Description: IC UART SINGLE W/FIFO 32-HVQFN
• Manufacturer: NXP Semiconductors

Specifications of SC16C850VIBS,128

• Features: Programmable
• Number Of Channels: 1, UART
• Fifo's: 128 Byte
• Protocol: RS485
• Voltage - Supply: 1.8V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN Exposed Pad
• Transmitter And Receiver Fifo Counter: Yes
• Data Rate: 5Mbps
• Mounting: Surface Mount
• Pin Count: 32
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935283087128; SC16C850VIBS-F; SC16C850VIBS-F

NXP Semiconductors
SC16C850V
Product data sheet
7.22 Advanced Feature Control Register 2 (AFCR2)
Table 32.
Bit
7:6
5
4
3
2
1
0
AFCR2[5]
AFCR2[4]
AFCR2[3]
AFCR2[2]
AFCR2[1]
AFCR2[0]
Symbol
AFCR2[7:6]
Advanced Feature Control Register 2 bits description
Single UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
All information provided in this document is subject to legal disclaimers.
RS485 RTS/DTR. Select RTS or DTR pin to control the external
RXDisable. Disable receiver.
9-bitMode. Enable 9-bit mode or Multidrop (RS-485) mode.
Description
reserved
RTSInvert. Invert RTS or DTR signal in auto 9-bit mode.
RTSCon. Enable the transmitter to control RTS or DTR signal in auto 9-bit
mode.
transceiver.
TXDisable. Disable transmitter.
Rev. 5 — 19 January 2011
logic 0 = RTS or DTR is set to 0 by the UART during transmission, and to
1 during reception
logic 1 = RTS or DTR is set to 1 by the UART during transmission, and to
0 during reception
logic 0 = transmitter does not control RTS or DTR signal
logic 1 = transmitter controls RTS or DTR signal
logic 0 = RTS pin is used to control the external transceiver
logic 1 = DTR pin is used to control the external transceiver
logic 0 = transmitter is enabled
logic 1 = transmitter is disabled
logic 0 = receiver is enabled
logic 1 = receiver is disabled
logic 0 = normal RS-232 mode
logic 1 = enable 9-bit mode
SC16C850V
© NXP B.V. 2011. All rights reserved.
33 of 48