ADAU1701JSTZ Analog Devices Inc, ADAU1701JSTZ Datasheet - Page 40

• Manufacturer Part Number: ADAU1701JSTZ
• Description: IC AUDIO PROC 2ADC/4DAC 48-LQFP
• Manufacturer: Analog Devices Inc
• Series: SigmaDSP®r
• Type: Audio Processorr

Specifications of ADAU1701JSTZ

• Design Resources: Analog Audio Input, Class-D Output with ADAU1701, SSM2306, and ADP3336 (CN0162)
• Applications: Automotive, Monitors, MP3
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Audio Control Type: Digital
• Control Interface: I2C, Serial
• Supply Voltage Range: 1.8V, 3.3V
• Operating Temperature Range: 0°C To +70°C
• Audio Ic Case Style: LQFP
• No. Of Pins: 48
• Svhc: No SVHC
• Control / Process Application: MP3 Player Speaker Docks, Automotive Head Units, Studio Monitors
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-ADAU1701MINIZ - BOARD EVAL SIGMADSP AUD ADAU1701EVAL-ADAU1701EBZ - BOARD EVAL FOR ADAU1701
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADAU1701
2076 (0x081C)—DSP CORE CONTROL REGISTER
Table 46. DSP Core Control Register Bit Map
D15
RSVD
Table 47. DSP Core Control Register
Bit Name
GD[1:0]
AACW
GPCW
IFCW
IST
ADM
DAM
CR
SR[1:0]
D14
RSVD
D13
GD1
D12
GD0
Description
GPIO Debounce Control. Sets debounce time of multipurpose pins that are set as GPIO inputs.
GD[1:0]
00
01
10
11
Auxiliary ADC Data Registers Control Port Write Mode. Setting this bit allows data to be written directly to the
auxiliary ADC data registers (2057 to 2060) from the control port. When this bit is set, the auxiliary ADC data
registers ignore the settings on the multipurpose pins.
GPIO Pin Setting Register Control Port Write Mode. When this bit is set, the GPIO pin setting register (2056) can
be written to directly from the control port and this register ignores the input settings on the multipurpose
pins.
Interface Registers Control Port Write Mode. When this bit is set, data can be written directly to the interface
registers (2048 to 2055) from the control port. In that state, the interface registers are not written from the
SigmaDSP program.
Initiate Safeload Transfer. Setting this bit to 1 initiates a safeload transfer to the parameter RAM. This bit is
automatically cleared when the operation is complete. There are five safeload register pairs (address/data);
only those registers that have been written since the last safeload event are transferred to the parameter RAM.
Mute ADCs. This bit mutes the output of the ADCs. The bit defaults to 0 and is active low; therefore, it must be
set to 1 to transmit audio signals from the ADCs.
Mute DACs. This bit mutes the output of the DACs. The bit defaults to 0 and is active low; therefore, it must be
set to 1 to transmit audio signals from the DACs.
Clear Internal Registers to 0. This bit defaults to 0 and is active low. It must be set to 1 for a signal to pass
through the SigmaDSP core.
Sample Rate. These bits set the number of DSP instructions for every sample and the sample rate at which the
ADAU1701 operates. At the default setting of 1×, there are 1024 instructions per audio sample. This setting
should be used with sample rates such as 48 kHz and 44.1 kHz.
At the 2× setting, the number of instructions per frame is halved to 512 and the ADCs and DACs nominally run
at a 96 kHz sample rate.
At the 4× setting, there are 256 instructions per cycle and the converters run at a 192 kHz sample rate.
SR[1:0]
00
01
10
11
D11
RSVD
Setting
1× (1024 instructions)
2× (512 instructions)
4× (256 instructions)
Reserved
D10
RSVD
Time (ms)
20
40
10
5
D9
RSVD
D8
AACW
Rev. A | Page 40 of 56
D7
GPCW
D6
IFCW
D5
IST
D4
ADM
D3
DAM
D2
CR
D1
SR1
D0
SR0
Default
0x0000