mc68hc908jb16 Freescale Semiconductor, Inc, mc68hc908jb16 Datasheet - Page 190

• Manufacturer Part Number: mc68hc908jb16
• Description: M68hc08 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Universal Serial Bus Module (USB)
11.8.6 USB Control Register 1
Technical Data
190
Address:
TP0SIZ3–TP0SIZ0 — Endpoint 0 Transmit Data Packet Size
T1SEQ — Endpoint 1 Transmit Sequence Bit
STALL1 — Endpoint 1 Force Stall Bit
TX1E — Endpoint 1 Transmit Enable
Reset:
Read:
Write:
These read/write bits store the number of transmit data bytes for the
next IN token request for endpoint 0. These bits are cleared by reset.
This read/write bit determines which type of data packet (DATA0 or
DATA1) will be sent during the next IN transaction directed to
endpoint 1. Toggling of this bit must be controlled by software. Reset
clears this bit.
This read/write bit causes endpoint 1 to return a STALL handshake
when polled by either an IN or OUT token by the USB host controller.
Reset clears this bit.
This read/write bit enables a transmit to occur when the USB host
controller sends an IN token to endpoint 1. The appropriate endpoint
enable bit, ENABLE1 bit in the UCR3 register, also should be set.
Software should set the TX1E bit when data is ready to be
transmitted. It must be cleared by software when no more data needs
to be transmitted.
1 = DATA1 token active for next endpoint 1 transmit
0 = DATA0 token active for next endpoint 1 transmit
1 = Send STALL handshake
0 = Default
T1SEQ
$003C
Bit 7
Universal Serial Bus Module (USB)
0
Figure 11-20. USB Control Register 1 (UCR1)
STALL1
6
0
TX1E
5
0
FRESUM TP1SIZ3
4
0
3
0
MC68HC908JB16
TP1SIZ2
Freescale Semiconductor
2
0
TP1SIZ1
1
0
—
TP1SIZ0
Rev. 1.1
Bit 0
0