mc68hc908jb16 Freescale Semiconductor, Inc, mc68hc908jb16 Datasheet - Page 192

• Manufacturer Part Number: mc68hc908jb16
• Description: M68hc08 Microcontrollers Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Universal Serial Bus Module (USB)
Technical Data
192
STALL2 — Endpoint 2 Force Stall Bit
TX2E — Endpoint 2 Transmit Enable
RX2E — Endpoint 2 Receive Enable
TP2SIZ3–TP2SIZ0 — Endpoint 2 Transmit Data Packet Size
This read/write bit causes endpoint 2 to return a STALL handshake
when polled by either an IN or OUT token by the USB host controller.
Reset clears this bit.
This read/write bit enables a transmit to occur when the USB host
controller sends an IN token to endpoint 2. The appropriate endpoint
enable bit, ENABLE2 bit in the UCR3 register, also should be set.
Software should set the TX2E bit when data is ready to be
transmitted. It must be cleared by software when no more data needs
to be transmitted.
If this bit is 0 or the TXD2F is set, the USB will respond with a NAK
handshake to any endpoint 2 directed IN tokens. Reset clears this bit.
This read/write bit enables a receive to occur when the USB host
controller sends an OUT token to endpoint 2. Software should set this
bit when data is ready to be received. It must be cleared by software
when data cannot be received.
If this bit is 0 or the RXD2F is set, the USB will respond with a NAK
handshake to any endpoint 2 OUT tokens. Reset clears this bit.
These read/write bits store the number of transmit data bytes for the
next IN token request for endpoint 2. These bits are cleared by reset.
1 = Send STALL handshake
0 = Default
1 = Data is ready to be sent
0 = Data is not ready. Respond with NAK
1 = Data is ready to be received
0 = Not ready for data. Respond with NAK
Universal Serial Bus Module (USB)
MC68HC908JB16
Freescale Semiconductor
—
Rev. 1.1