mc68hc705e5 Freescale Semiconductor, Inc, mc68hc705e5 Datasheet - Page 101

• Manufacturer Part Number: mc68hc705e5
• Description: M68hc05 Family Of Microcontrollers Mcus
• Manufacturer: Freescale Semiconductor, Inc

MC68HC705E5
—
Rev. 1.0
LSBF — Least Significant Bit First
MSTR — Master Mode
CPOL — Clock Polarity
SDIR — Serial Data Direction
The LSBF bit determines the format of the data transfer. The two
formats are least significant bit (LSB) or most significant bit (MSB)
transferred or received first. Reset clears this bit, initializing the SSI to
MSB first order.
Reset clears this bit and configures the SSI for slave operation. MSTR
may be set at any time regardless of the state of SE.
The clock polarity bit controls the state of the SCK pin between
transmissions.
In both cases, the data is latched on the rising edge of SCK for serial
input and is valid on the rising edge of SCK for serial output. Reset
sets this bit.
When the SE bit = 1, SDIR functions as the output driver enable bit
for the SDIO pin with SSI in master or in slave mode. This bit has no
effect on the SDIO pin when the SSI is disabled (SE = 0). This bit is
cleared by reset.
Freescale Semiconductor, Inc.
For More Information On This Product,
1 = Data will be sent and received in an LSB first format.
0 = Data will be sent and received in an MSB first format.
1 = SSI is configured for master mode. The transmission is initiated
0 = SSI is configured to slave mode. Any transmission in progress
1 = SCK will be high between transmissions.
0 = SCK will be low between transmissions.
1 = Enable the output driver of the SDIO pin.
0 = Disable the output driver of the SDIO pin.
Synchronous Serial Interface (SSI)
by a write to the data register and the SCK pin becomes an
output providing a synchronous data clock at a rate determined
by the SR bit.
is aborted. Transfers are initiated by an external master which
should supply the clock signal to the SCK pin.
Go to: www.freescale.com
Synchronous Serial Interface (SSI)
General Release Specification
SSI Registers