S9S12G64F1MLC Freescale Semiconductor, S9S12G64F1MLC Datasheet - Page 174

• Manufacturer Part Number: S9S12G64F1MLC
• Description: 16-bit Microcontrollers - MCU S12CORE,64K FLASH,AU
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G64F1MLC

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 64 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-32
• Mounting Style: SMD/SMT

Port Integration Module (S12GPIMV1)
176
PS4
PS3
PS2
PS1
PS0
• The SPI0 MISO signal is mapped to this pin when used with the SPI function. Depending on the
• 20 TSSOP: The SCI0 RXD signal is mapped to this pin when used with the SCI function. If the SCI0
• 20 TSSOP: The PWM channel 2 signal is mapped to this pin when used with the PWM function. If the
• 32 LQFP: The PWM channel 4 signal is mapped to this pin when used with the PWM function. The
• 20 TSSOP: The ADC ETRIG2 signal is mapped to this pin if PWM channel 2 is routed here. The
• Signal priority:
• Except 20 TSSOP and 32 LQFP: The SCI1 TXD signal is mapped to this pin when used with the SCI
• Signal priority:
• Except 20 TSSOP and 32 LQFP: The SCI1 RXD signal is mapped to this pin when used with the SCI
• Signal priority:
• Except 20 TSSOP: The SCI0 TXD signal is mapped to this pin when used with the SCI function. If the
• Signal priority:
• Except 20 TSSOP: The SCI0 RXD signal is mapped to this pin when used with the SCI function. If the
• Signal priority:
configuration of the enabled SPI0 the I/O state is forced to be input or output.
RXD signal is enabled and routed here the I/O state will be forced to input.
PWM channel is enabled and routed here the I/O state is forced to output.
enabled PWM channel forces the I/O state to be an output.
enabled external trigger function has no effect on the I/O state. Refer to
Triggers
20 TSSOP: MISO0 > RXD0 > PWM2 > GPO
32 LQFP: MISO0 > PWM4 > GPO
Others: MISO0 > GPO
function. If the SCI1 TXD signal is enabled the I/O state will depend on the SCI1 configuration.
48/64/100 LQFP: TXD1 > GPO
function. If the SCI1 RXD signal is enabled the I/O state will be forced to be input.
20 TSSOP and 32 LQFP: GPO
Others: RXD1 > GPO
SCI0 TXD signal is enabled the I/O state will depend on the SCI0 configuration.
Except 20 TSSOP: TXD0 > GPO
SCI0 RXD signal is enabled the I/O state will be forced to be input.
20 TSSOP: GPO
Others: RXD0 > GPO
ETRIG3-0”.
Table 2-12. Port
MC9S12G Family Reference Manual,
S
Pins PS7-0 (continued)
Rev.1.23
Section 2.6.4, “ADC External
Freescale Semiconductor