MPC561MZP56 Freescale Semiconductor, MPC561MZP56 Datasheet - Page 349

• Manufacturer Part Number: MPC561MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC561MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Controller Family/series: POWER 5xx
• No. Of I/o's: 56
• Ram Memory Size: 31KB
• Cpu Speed: 56MHz
• No. Of Timers: 32
• Embedded Interface Type: QSPI, SCI, UART
• No. Of Pwm Channels: 12
• Rohs Compliant: No
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

9.5.2
During the data transfer phase, the data is transferred from master to slave (in write cycles) or from slave
to master (on read cycles).
During a write cycle, the master drives the data as soon as it can, but never earlier than the cycle following
the address transfer phase. The master has to take into consideration the “one dead clock cycle” switching
between drivers to avoid electrical contentions. The master can stop driving the data bus as soon as it
samples the TA line asserted on the rising edge of the CLKOUT.
During a read cycle, the master accepts the data bus contents as valid at the rising edge of the CLKOUT
in which the TA signal is sampled/asserted.
9.5.2.1
The basic read cycle begins with bus arbitration, followed by the address transfer, then the data transfer.
The handshakes illustrated in the following flow and timing figures
Figure
Freescale Semiconductor
9-6) are applicable to the fixed transaction protocol.
Single Beat Transfer
Single Beat Read Flow
4. Assert transfer start (TS)
3. Assert bus busy (BB) if no other master is driving bus
5. Drive address and attributes
2. Receive bus grant (BG) from arbiter
1. Request bus (BR)
Figure 9-4. Basic Flow Diagram of a Single Beat Read Cycle
Master
MPC561/MPC563 Reference Manual, Rev. 1.2
1. Receive address
2. Return data
3. Assert transfer acknowledge (TA)
(Figure
Slave
9-4,
Figure
External Bus Interface
9-5, and
9-9