MPC561MZP56 Freescale Semiconductor, MPC561MZP56 Datasheet - Page 897

• Manufacturer Part Number: MPC561MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC561MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Controller Family/series: POWER 5xx
• No. Of I/o's: 56
• Ram Memory Size: 31KB
• Cpu Speed: 56MHz
• No. Of Timers: 32
• Embedded Interface Type: QSPI, SCI, UART
• No. Of Pwm Channels: 12
• Rohs Compliant: No
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

Chapter 22
CALRAM Operation
The calibration static random access memory (CALRAM) module provides the MPC561/MPC563 with a
general purpose memory that may be read from or written to as either bytes, half-words, or words. In
addition to this, a portion of the CALRAM, called the overlay region, can be used for calibration.
Calibration in this context is defined as overlaying portions of the U-bus Flash with a portion of the
CALRAM array. During normal Flash access, the RISC central processing unit (RPCU) reads data from
U-bus Flash (through L-bus and L2U) as shown in
providing the data, the overlay regions of CALRAM provide the data to the RPCU.
22.1
Standard CALRAM features are listed below:
Special overlay features are:
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
One-clock accesses
— Two-cycle access for power savings
Byte, half-word (16-bits), or word (32-bit) read/write accesses
Each 8-Kbyte block has individual protection control bits.
Low power standby operation for data retention
Eight overlay regions; each can be programmed to be 4-, 16-, 32-, 64-, 128-, 256-, or 512-bytes
long
Each overlay region size can be forced to 4 bytes long
Data driven from the CALRAM module for overlay access has the same timing as the data that
would have come from the U-bus Flash
Overlay is for data read from the U-bus Flash space and does not affect instruction fetches from
the Flash
Overlay block is naturally aligned
— For example, 128-byte block is 128-byte aligned
Normal access to overlaid portion of CALRAM array can be made to generate an error (machine
check) if so configured
Features
MPC561/MPC563 Reference Manual, Rev. 1.2
Figure
22-1. During calibration access, instead of Flash
22-1