EP9302-CQZ Cirrus Logic Inc, EP9302-CQZ Datasheet - Page 337

• Manufacturer Part Number: EP9302-CQZ
• Description: IC ARM9 SOC PROCESSOR 208LQFP
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9302-CQZ

• Program Memory Type: ROMless
• Package / Case: 208-LQFP
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• Data Ram Size: 16 bit
• Interface Type: USB, USART, SPI
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 37
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9302A-Z
• Controller Family/series: (ARM9)
• No. Of I/o's: 19
• Ram Memory Size: 16MB
• Cpu Speed: 200MHz
• No. Of Timers: 4
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1132 - KIT DEVELOPMENT EP9302 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1137

DS785UM1
9.2.3.13 Transmit Errors
Refer to
Transmit error conditions are broken into two categories: hard errors and soft errors. A hard
error is generally considered a reliability problem. This includes AHB bus access problems. A
soft error indicates that the frame was not successfully transmitted. The error may be
expected or rare. A soft error needs a graceful recovery by the host driver. Soft errors include:
excessive collisions, SQE error (if connected to a MAU). Hard errors are parity errors (if
enabled), system errors, master and target aborts. These will stop further transmit DMA
activity and require host intervention for recovery.
Hard errors cause the Descriptor Processor to halt operation. This allows the Host to
determine the cause of error and reinitialize and restart the bus master operations.
Most soft errors do not cause the frame processing operations to halt. The Descriptor
Processor simply flags the error and continues on to the next frame. The exception is on a
transmit underrun. By halting the transmit frame processing, the Host has the ability to re-
initialize the transmit Descriptor Processor registers to point to the start of the failed frame
and re-initialize. This will cause the MAC to reattempt the failed frame and allows the order of
frame transmission to be maintained.
Note: Steps 1, 2, 10, and 11 are transparent to the MAC block. Steps 3 through 9, inclusive,
1. Protocol stack initiates a transmit frame.
2. Driver parses protocol stack buffer into Transmit Descriptor Queue.
3. Driver writes number of additional entries to the Transmit Enqueue register.
4. On-chip Descriptor Processor fetches descriptor information.
5. On-chip Descriptor Processor initiates data move.
6. Frame data fetched from system memory into the transmit FIFO.
7. Frame transmitted onto LAN medium. Steps 6 and 7 can overlap.
8. End of frame status written to status queue
9. Driver interrupted if interrupt conditions met.
10.Driver processes the transmit status
11.Driver informs the protocol stack that transmit is complete.
directly involve the MAC.
Figure
9-16. The detailed transmit flow is:
Copyright 2007 Cirrus Logic
1/10/100 Mbps Ethernet LAN Controller
EP93xx User’s Guide
9-35
9