ATMEGA32U4-AU Atmel, ATMEGA32U4-AU Datasheet - Page 173

• Manufacturer Part Number: ATMEGA32U4-AU
• Description: MCU AVR 32K FLASH 16MHZ 44-TQFP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA32U4-AU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2.5 KB
• Interface Type: SPI/TWI/USART
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 26
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• Cpu Family: ATmega
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 16MHz
• Total Internal Ram Size: 2.5KB
• # I/os (max): 26
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 44
• Package Type: TQFP
• Controller Family/series: AVR MEGA
• No. Of I/o's: 26
• Eeprom Memory Size: 1KB
• Ram Memory Size: 2.5KB
• Cpu Speed: 16MHz
• Rohs Compliant: Yes
• For Use With: ATSTK524 - KIT STARTER ATMEGA32M1/MEGA32C1ATSTK600 - DEV KIT FOR AVR/AVR32ATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATMEGA32U4-16AU; ATMEGA32U4-16AU

15.12.13 TIFR4 – Timer/Counter4 Interrupt Flag Register
7766F–AVR–11/10
• Bit 5 - OCIE4B: Timer/Counter4 Output Compare Interrupt Enable
When the OCIE4B bit is set (one) and the I-bit in the Status Register is set (one), the
Timer/Counter4 Compare Match B interrupt is enabled. The corresponding interrupt at vector
$009 is executed if a compare match B occurs. The Compare Flag in Timer/Counter4 is set
(one) in the Timer/Counter Interrupt Flag Register.
• Bit 2 - TOIE4: Timer/Counter4 Overflow Interrupt Enable
When the TOIE4 bit is set (one) and the I-bit in the Status Register is set (one), the
Timer/Counter4 Overflow interrupt is enabled. The corresponding interrupt (at vector $004) is
executed if an overflow in Timer/Counter4 occurs. The Overflow Flag (Timer4) is set (one) in the
Timer/Counter Interrupt Flag Register - TIFR4.
• Bit 7- OCF4D: Output Compare Flag 4D
The OCF4D bit is set (one) when compare match occurs between Timer/Counter4 and the data
value in OCR4D - Output Compare Register 4D. OCF4D is cleared by hardware when executing
the corresponding interrupt handling vector. Alternatively, OCF4D is cleared, after synchroniza-
tion clock cycle, by writing a logic one to the flag. When the I-bit in SREG, OCIE4D, and OCF4D
are set (one), the Timer/Counter4 D compare match interrupt is executed.
• Bit 6 - OCF4A: Output Compare Flag 4A
The OCF4A bit is set (one) when compare match occurs between Timer/Counter4 and the data
value in OCR4A - Output Compare Register 4A. OCF4A is cleared by hardware when executing
the corresponding interrupt handling vector. Alternatively, OCF4A is cleared, after synchroniza-
tion clock cycle, by writing a logic one to the flag. When the I-bit in SREG, OCIE4A, and OCF4A
are set (one), the Timer/Counter4 A compare match interrupt is executed.
• Bit 5 - OCF4B: Output Compare Flag 4B
The OCF4B bit is set (one) when compare match occurs between Timer/Counter4 and the data
value in OCR4B - Output Compare Register 4B. OCF4B is cleared by hardware when executing
the corresponding interrupt handling vector. Alternatively, OCF4B is cleared, after synchroniza-
tion clock cycle, by writing a logic one to the flag. When the I-bit in SREG, OCIE4B, and OCF4B
are set (one), the Timer/Counter4 B compare match interrupt is executed.
• Bit 2 - TOV4: Timer/Counter4 Overflow Flag
In Normal Mode and Fast PWM Mode the TOV4 bit is set (one) each time the counter reaches
TOP at the same clock cycle when the counter is reset to BOTTOM. In Phase and Frequency
Correct PWM Mode the TOV4 bit is set (one) each time the counter reaches BOTTOM at the
same clock cycle when zero is clocked to the counter.
The bit TOV4 is cleared by hardware when executing the corresponding interrupt handling vec-
tor. Alternatively, TOV4 is cleared, after synchronization clock cycle, by writing a logical one to
the flag. When the SREG I-bit, and TOIE4 (Timer/Counter4 Overflow Interrupt Enable), and
TOV4 are set (one), the Timer/Counter4 Overflow interrupt is executed.
Bit
Read/Write
Initial value
OCF4D
R/W
7
0
OCF4A
R/W
6
0
OCF4B
R/W
5
0
R/W
4
0
R/W
3
0
TOV4
R/W
2
0
ATmega16/32U4
R/W
1
0
R/W
0
0
TIFR4
173