AT91SAM9R64-CU-999 Atmel, AT91SAM9R64-CU-999 Datasheet - Page 676

• Manufacturer Part Number: AT91SAM9R64-CU-999
• Description: IC MCU ARM9 64K SRAM 144LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: SPI, TWI, UART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

39.10 Register Configuration Guide
39.10.1
39.10.2
676
AT91SAM9R64/RL64 Preliminary
STN Mode Example
TFT Mode Example
Program the PIO Controller to enable LCD signals.
Enable the LCD controller clock in the Power Management Controller.
STN color(R,G,B) 320*240, 8-bit single scan, 70 frames/sec, Master clock = 60 Mhz
Data rate: 320*240*70*3/8 = 2.016 MHz
HOZVAL= ((3*320)/8) - 1
LINEVAL= 240 -1
CLKVAL = (60 MHz/ (2*2.016 MHz)) - 1= 14
LCDCON1= CLKVAL << 12
LCDCON2 = LITTLEENDIAN | SINGLESCAN | STNCOLOR | DISP8BIT| PS8BPP;
LCDTIM1 = 0;
LCDTIM2 = 10 | (10 << 21);
LCDFRMCFG = (HOZVAL << 21) | LINEVAL;
DMAFRMCFG = (7 << 24) + (320 * 240 * 8) / 32;
This example is based on the NEC TFT color LCD module NL6448BC20-08
TFT 640*480, 16-bit single scan, 60 frames/sec, pixel clock frequency = [21MHz..29MHz] with a
typical value = 25.175 MHz.
The Master clock must be (2*(n + 1))*pixel clock frequency
HOZVAL = 640 - 1
LINEVAL = 480 - 1
If Master clock is 50 MHz
CLKVAL = (50 MHz/ (2*25.175 MHz)) - 1= 0
VFP = (12 -1), VBP = (31-1), VPW = (2-1), VHDLY= (2-1)
HFP = (16-1), HBP = (48 -1), HPW= (96-1)
LCDCON1= CLKVAL << 12
LCDCON2 = LITTLEENDIAN | CLKMOD | INVERT_CLK | INVERT_LINE | INVERT_FRM |
PS16BPP | SINGLESCAN | TFT
LCDTIM1 = VFP | (VBP << 8) | (VPW << 16) | (VHDLY << 24)
LCDTIM2 = HBP | (HPW << 8) | (HFP << 21)
LCDFRMCFG = (HOZVAL << 21) | LINEVAL
DMAFRMCFG = (7 << 24) + (640 * 480* 16) / 32;
.
6289C–ATARM–28-May-09