D12312SVTEBL25 Renesas Electronics America, D12312SVTEBL25 Datasheet - Page 1062
![IC H8S MCU ROMLESS 100-QFP](/photos/28/61/286108/100-tqfp_sml.jpg)
D12312SVTEBL25
Manufacturer Part Number
D12312SVTEBL25
Description
IC H8S MCU ROMLESS 100-QFP
Manufacturer
Renesas Electronics America
Series
H8® H8S/2300r
Specifications of D12312SVTEBL25
Core Processor
H8S/2000
Core Size
16-Bit
Speed
25MHz
Connectivity
SCI, SmartCard
Peripherals
POR, PWM, WDT
Number Of I /o
70
Program Memory Type
ROMless
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 3.6 V
Data Converters
A/D 8x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 75°C
Package / Case
100-TQFP, 100-VQFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-
Program Memory Size
-
Other names
HD6412312SVTEBL25
HD6412312SVTEBL25
HD6412312SVTEBL25
- Current page: 1062 of 1146
- Download datasheet (7Mb)
Appendix B Internal I/O Registers
SSR1—Serial Status Register 1
Rev.7.00 Feb. 14, 2007 page 1028 of 1108
REJ09B0089-0700
Note: * Can only be written with 0 for flag clearing.
Bit
Initial value
Read/Write
:
:
:
R/(W) *
Transmit Data Register Empty
TDRE
0
1
7
1
[Clearing conditions]
• When 0 is written to TDRE after reading TDRE = 1
• When the DTC is activated by a TXI interrupt and writes data to TDR
[Setting conditions]
• When the TE bit in SCR is 0
• When data is transferred from TDR to TSR and data can be written to TDR
Note: * RDR and the RDRF flag are not affected and retain their previous values when an error is detected during reception or when the RE bit
Receive Data Register Full *
0
1
R/(W) *
RDRF
[Clearing conditions]
• When 0 is written to RDRF after reading RDRF = 1
• When the DTC is activated by an RXI interrupt and reads data from RDR
[Setting condition]
When serial reception ends normally and receive data is transferred from RSR to RDR
6
0
in SCR is cleared to 0.
If reception of the next data is completed while the RDRF flag is still set to 1, an overrun error will occur and the receive data will be lost.
Notes: 1. The ORER flag is not affected and retains its previous state when the RE bit in SCR is cleared to 0.
Overrun Error
0
1
R/(W) *
ORER
[Clearing condition]
When 0 is written to ORER after reading ORER = 1 *
[Setting condition]
When the next serial reception is completed while RDRF = 1
5
0
2. The receive data prior to the overrun error is retained in RDR, and data received subsequently is lost. Serial reception
Note: * Clearing the TE bit in SCR to 0 does not affect the ERS flag, which retains its prior state.
Error Signal Status *
cannot be continued while the ORER flag is set to 1. In synchronous mode, serial transmission is also disabled.
0
1
R/(W) *
ERS
Data has been received normally, and there is no error signal
[Clearing conditions]
• On reset, or in standby mode or module stop mode
• When 0 is written to ERS after reading ERS =1
Error signal indicating detection of parity error has been sent by receiving device
[Setting condition]
When the error signal is sampled at the low level
4
0
Notes: 1. The PER flag is not affected and retains its previous state when the RE bit in SCR is cleared to 0.
Parity Error
0
1
R/(W) *
PER
[Clearing condition]
When 0 is written to PER after reading PER = 1
[Setting condition]
When, in reception, the number of 1 bits in the receive data plus the parity bit
does not match the parity setting (even or odd) specified by the O/E bit in SMR
3
0
2. If a parity error occurs, the receive data is transferred to RDR but the RDRF flag is not set. Serial reception
Note: etu (Elementary Time Unit): Time for transfer of 1 bit
Transmit End
cannot be continued while the PER flag is set to 1. In synchronous mode, serial transmission is also disabled.
0
1
TEND
Transmission in progress
[Clearing conditions]
• When 0 is written to TDRE after reading TDRE = 1
• When the DTC is activated by a TXI interrupt and writes data to TDR
Transmission has ended
[Setting conditions]
• On reset, or in standby mode or module stop mode
• When the TE bit in SCR is 0 and the ERS bit is 0
• When TDRE = 1 and ERS = 0 (normal transmission) 2.5 etu after
• When TDRE = 1 and ERS = 0 (normal transmission) 1.5 etu after
• When TDRE = 1 and ERS = 0 (normal transmission) 1.0 etu after
• When TDRE = 1 and ERS = 0 (normal transmission) 1.0 etu after
2
1
R
transmission of a 1-byte serial character when GM = 0 and BLK = 0
transmission of a 1-byte serial character when GM = 0 and BLK = 1
transmission of a 1-byte serial character when GM = 1 and BLK = 0
transmission of a 1-byte serial character when GM = 1 and BLK = 1
Note: * Retains its previous state when the RE bit in SCR is
Multiprocessor Bit
0
1
MPB
[Clearing condition]
When data with a 0 multiprocessor bit is received *
[Setting condition]
When data with a 1 multiprocessor bit is received
1
0
R
cleared to 0 with a multiprocessor format.
Multiprocessor Bit Transfer
0
1
MPBT
R/W
Data with a 0 multiprocessor bit is transmitted
Data with a 1 multiprocessor bit is transmitted
0
0
1
*
2
H'FF84
*
1
Smart Card Interface 1
*
2
Related parts for D12312SVTEBL25
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![R0K330290S001BE](/photos/28/41/284146/r0k330290s001be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR M16C/29
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K5212D8S001BE](/photos/24/13/241324/4607177_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8C/2D
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K33062PS001BE](/photos/24/13/241320/4607173_tmb.jpg)
Part Number:
Description:
R0K33062P STARTER KIT
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K521237S001BE](/photos/28/41/284170/r0k521237s001be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8C/23 E8A
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K521256S001BE](/photos/24/13/241323/4607176_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8C/25
Manufacturer:
Renesas Electronics America
Datasheet:
![YLCDRSK2456S](/images/manufacturer_photos/0/5/560/renesas_electronics_america_tmb.jpg)
Part Number:
Description:
KIT STARTER H8S2456 SHARPE DSPLY
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K521380S000BE](/photos/28/41/284144/r0k521380s000be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8C38C
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K521350S000BE](/photos/28/41/284145/r0k521350s000be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8C35C
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K52L3A0S000BE](/photos/28/41/284149/r0k52l3a0s000be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R8CL3AC+LCD APPS
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K556100S000BE](/images/manufacturer_photos/0/5/560/renesas_electronics_america_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR RX610
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K564189S000BE](/photos/28/41/284173/r0k564189s000be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR R32C/118
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K521276S000BE](/photos/9/26/92647/r0k521276s000be_tmb.jpg)
Part Number:
Description:
KIT DEV RSK-R8C/26-29
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K571242S001BE](/photos/9/23/92397/r0k571242s001be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR SH7124
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K561622S000BE](/photos/9/23/92398/r0k561622s000be_tmb.jpg)
Part Number:
Description:
KIT STARTER FOR H8SX/1622
Manufacturer:
Renesas Electronics America
Datasheet:
![R0K572030S000BE](/photos/9/24/92406/r0k572030s000be_tmb.jpg)
Part Number:
Description:
KIT DEV FOR SH7203
Manufacturer:
Renesas Electronics America
Datasheet: