MC912DG128ACPV Freescale Semiconductor, MC912DG128ACPV Datasheet - Page 383

• Manufacturer Part Number: MC912DG128ACPV
• Description: IC MCU 128K FLASH 8MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912DG128ACPV

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MC68HC912DT128A — Rev 4.0
MOTOROLA
RES10 — A/D Resolution Select
SMP[1:0] — Sample Time Select
PRS[4:0] — ATD Clock Prescaler
This bit determines the resolution of the A/D converter: 8-bits or 10-
bits. The A/D converter has the accuracy of a 10-bit converter.
However, if low resolution is adequate, the conversion can be
speeded up by selecting 8-bit resolution.
These two bits select the length of the third phase of the sample
period (in internal ATD clock cycles) which occurs after the buffered
sample and transfer. During this phase, the external analog signal is
connected directly to the storage node for final charging and improved
accuracy. Note that the ATD clock period is itself a function of the
prescaler value (bits PRS0–4).
for the third sample phase.
The binary prescaler value (0 to 31) plus one (1 to 32) becomes the
divide-by-factor for a modulus counter used to prescale the system
PCLK frequency. The resulting scaled clock is further divided by 2
before the ATD internal clock is generated. This clock is used to drive
the S/H and A/D machines.
Note that the maximum ATD clock frequency is half of the system
clock. The default prescaler value is 00001 which results in a default
ATD clock frequency that is quarter of the system clock i.e. with 8MHz
bus the ATD module clock is 2MHz.
by operation and the appropriate range of system clock frequencies.
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = 8-bit resolution selected
1 = 10-bit resolution selected
Analog-to-Digital Converter
Go to: www.freescale.com
Table 19-4. Final Sample Time Selection
SMP1
0
0
1
1
SMP0
0
1
0
1
Table 19-4
16 A/D clock periods
Final Sample Time
2 A/D clock periods
4 A/D clock periods
8 A/D clock periods
Table 19-5
lists the lengths available
Analog-to-Digital Converter
illustrates the divide-
Technical Data
ATD Registers
383