30068 Parallax Inc, 30068 Datasheet - Page 130

• Manufacturer Part Number: 30068
• Description: EMBEDDED BLUE TRANSCEIVER APPMOD
• Manufacturer: Parallax Inc

Specifications of 30068

• Frequency: 2.4GHz
• Data Rate - Maximum: 90kBaud
• Modulation Or Protocol: Bluetooth v1.1, Class 2
• Applications: Bluetooth v1.1
• Power - Output: -4dBm
• Sensitivity: -85dBm
• Voltage - Supply: 5 V ~ 10 V
• Current - Receiving: 80mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Through Hole
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 75°C
• Package / Case: Module
• Product: Microcontroller Accessories
• Operating Supply Voltage: 5 to 12 V
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2239141

Firmware Upgrade
Step 2:
Step 3:
Page 124 ▪ EmbeddedBlue 500 User Manual
1. Insert an eb500 module into the eb600 RS232 Adapter header; assuring that Pin 1
2. Connect the eb600 RS232 Adapter to a serial port on the PC using the provided
3. Apply power to the eb600 RS232 Adapter.
1. Using a terminal emulator, such as HyperTerminal, establish a connection with the
2. Set the baud rate of the eb500 module to 9600 baud by issuing the set baud rate
3. Close the terminal emulator.
In this step we will attach an eb500 module to the eb600 PC Adapter and apply
power to the device.
of the eb500 module is inserted into Pin 1 of the header on the eb600 RS232
Adapter.
straight through serial cable.
In this step we will configure the eb500 module to communicate with the
EmbeddedBlue DFU Wizard. If your eb500 module is already configured to
communicate at 9600 baud you may proceed to the next step.
eb500 attached to the eb600 RS232 Adapter.
If you need assistance in the setup of HyperTerminal to communicate with your
eb500 module, please refer to the Establishing a Connection section of this manual
under the topic Connecting a PC with an eb600 to a Board of Education, Step 2:
HyperTerminal Setup.
command.
To set the baud rate, type set baud 9600 at the “>” prompt and press the return
key.
Example:
eb600 RS232 Adapter Setup
eb500 Module Setup
>set baud 9600
ACK
>