30068 Parallax Inc, 30068 Datasheet - Page 80

• Manufacturer Part Number: 30068
• Description: EMBEDDED BLUE TRANSCEIVER APPMOD
• Manufacturer: Parallax Inc

Specifications of 30068

• Frequency: 2.4GHz
• Data Rate - Maximum: 90kBaud
• Modulation Or Protocol: Bluetooth v1.1, Class 2
• Applications: Bluetooth v1.1
• Power - Output: -4dBm
• Sensitivity: -85dBm
• Voltage - Supply: 5 V ~ 10 V
• Current - Receiving: 80mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Through Hole
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 75°C
• Package / Case: Module
• Product: Microcontroller Accessories
• Operating Supply Voltage: 5 to 12 V
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2239141

Communications
Step 2:
Page 74 ▪ EmbeddedBlue 500 User Manual
4. On the File menu, click Save As.
5. In the File name box, enter a file name to which to save the program just created.
6. Click Save.
7. Apply power to the Board of Education board.
8. On the Run menu, click Run.
9. Establish a connection from the PC to the Board of Education.
10. Using HyperTerminal, type a series of characters.
1. Open HyperTerminal on the port for inbound Bluetooth connections.
2. Using the BASIC Stamp Editor, on the File menu, click New.
3. Enter the following program code into the editor, replacing the device Bluetooth
For example, Receive.bs2.
This will display the Download Progress dialog while downloading the program to the
BASIC Stamp. After the download is complete, the Debug Terminal #1 dialog will be
shown.
Please see the section titled Connecting a PC with XP SP2 to a Board of Education
for information on establishing a connection.
These characters will be transmitted over the wireless link, read by the BASIC Stamp
application, and then displayed in the debug window.
In this step we will create a BASIC Stamp application to transmit data from the eb500
to the PC where we will use HyperTerminal to display the data received.
Please see the section titled Communicating between a PC with DBT-120 and a BOE
for information on configuring HyperTerminal for the inbound Bluetooth port.
This will create a new project window within the BASIC Stamp Editor.
address with the device address obtained from the Hardware tab of the Device
Properties section of the Bluetooth Configuration dialog on the PC. This application is
available in electronic form on the accompanying CD, in the Samples folder, in the
file HelloWorld.bs2.
'{$STAMP BS2}
nCount VAR BYTE
'Wait for the eb500 radio to be ready
PAUSE 1000
Transmit Data from the eb500 to the PC