30068 Parallax Inc, 30068 Datasheet - Page 36

• Manufacturer Part Number: 30068
• Description: EMBEDDED BLUE TRANSCEIVER APPMOD
• Manufacturer: Parallax Inc

Specifications of 30068

• Frequency: 2.4GHz
• Data Rate - Maximum: 90kBaud
• Modulation Or Protocol: Bluetooth v1.1, Class 2
• Applications: Bluetooth v1.1
• Power - Output: -4dBm
• Sensitivity: -85dBm
• Voltage - Supply: 5 V ~ 10 V
• Current - Receiving: 80mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Through Hole
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 75°C
• Package / Case: Module
• Product: Microcontroller Accessories
• Operating Supply Voltage: 5 to 12 V
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2239141

Establishing a Connection
Step 4:
Page 30 ▪ EmbeddedBlue 500 User Manual
2. Apply power to the Board of Education board.
1. Using HyperTerminal, get the address of the eb500 module that is connected to the
2. Using HyperTerminal, establish a connection with the eb500 that is connected to the
3. Disconnect power from both the eb600 PC Adapter and the Board of Education
Power can be applied by attaching a 9 Volt battery, or the AC-Adapter provided by
Parallax.
In this step we will establish a connection between the PC and the Board of
Education.
Board of Education board by using the eb500 LIST VISIBLE serial command.
By issuing the LIST VISIBLE command, the eb500 connected to the eb600 lists other
Bluetooth devices that are in range and visible. Please note that this operation will
take 30 seconds to complete.
To obtain the address, type lst visible at the “>” prompt and press the return
key.
Example:
Board of Education board by using the eb500 CONNECT serial command.
To establish a connection, type con followed by a space, followed by the address
returned in the previous action, followed by a carriage-return. The Connection Status
LED (Figure 1) on both eb500 modules will turn on when a connection is established.
Example:
boards.
The removal of power resets the eb500 so that when power is restored the eb500 will
boot into command mode.
Establish a Connection
>lst visible
ACK
00:0C:84:00:07:D7
>
>con 00:0C:84:00:07:D7
ACK
>