30068 Parallax Inc, 30068 Datasheet - Page 14

• Manufacturer Part Number: 30068
• Description: EMBEDDED BLUE TRANSCEIVER APPMOD
• Manufacturer: Parallax Inc

Specifications of 30068

• Frequency: 2.4GHz
• Data Rate - Maximum: 90kBaud
• Modulation Or Protocol: Bluetooth v1.1, Class 2
• Applications: Bluetooth v1.1
• Power - Output: -4dBm
• Sensitivity: -85dBm
• Voltage - Supply: 5 V ~ 10 V
• Current - Receiving: 80mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Through Hole
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 75°C
• Package / Case: Module
• Product: Microcontroller Accessories
• Operating Supply Voltage: 5 to 12 V
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2239141

The Basics
Page 8 ▪ EmbeddedBlue 500 User Manual
1. Open HyperTerminal.
2. In the Name box, type the name of your connection. (e.g. eb500).
3. Click OK.
4. In the Connect using dropdown, select the serial port to which you have connected
5. Click OK.
6. In the Bits per second dropdown, select 9600.
7. In the Data bits dropdown, select 8.
8. In the Parity dropdown, select None.
9. In the Stop bits dropdown, select 1.
10. In the Flow control dropdown, select None.
11. Click OK.
12. On the Call menu, click Disconnect.
13. On the File menu, click Properties.
14. On the Settings tab, click ASCII Setup.
15. Check the Send line ends with line feeds checkbox.
16. Check the Echo typed characters locally checkbox.
17. Check the Append line feeds to incoming line ends checkbox.
18. Check the Wrap lines that exceed terminal width checkbox.
This will display the Connection Description dialog.
This will display the Connect To dialog.
the eb600 interface board.
This will display the properties dialog.
This will establish a connection to the serial port assuming that no other devices are
using the serial port. If another device is using the serial port, disconnect the other
device using the associated application or choose a different serial port to connect
the eb500.
This will disconnect the connection just established so that we can modify the
connection properties as follows.
This will display the properties dialog.
This will display the ASCII Setup dialog.