MB95F126JBPFR-GE1 Fujitsu, MB95F126JBPFR-GE1 Datasheet - Page 5

• Manufacturer Part Number: MB95F126JBPFR-GE1
• Description: MCU, 8-BIT, 8FX, 32K FLASH, QFP100
• Manufacturer: Fujitsu

Specifications of MB95F126JBPFR-GE1

• Controller Family/series: F2MC-8FX
• No. Of I/o's: 87
• Ram Memory Size: 1KB
• Cpu Speed: 16.25MHz
• No. Of Timers: 7
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 32KB
• Oscillator Type: External Only

DS07-12610-5E
(Continued)
*1 : For ROM capacitance and RAM capacitance, refer to “■ MEMORY LINEUP”.
*2 : For details of option, refer to “■ MASK OPTION”.
Note : Part number of evaluation product in MB95120MB series is MB95FV100D-103. When using it, the MCU
Flash memory
Standby mode
Parameter
LCD controller
(LCDC)
16-bit reload timer
(1 channel)
8/16-bit compound
timer (2 channels)
16-bit PPG
(2 channels)
8/16-bit PPG
(2 channels)
Watch counter
Watch prescaler
(1 channel)
External interrupt
(12 channels)
board MB2146-303A-E is required.
Part number
COM output
SEG output
LCD drive power supply (bias) pin
40 SEG × 4 COM
Duty LCD mode
Operable in LCD standby mode
With blinking function
Built-in division resistance for LCD drive
Two clock modes and two counter operating modes can be selected.
Square waveform output
Count clock : 7 internal clocks and external clock can be selected.
Counter operating mode : reload mode or one-shot mode can be selected.
Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer ×
1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square
waveform output
Count clock : 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
Counter operating clock : Eight selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as
1 channel
Counter operating clock : Eight selectable clock sources
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63 (Capable of counting for 1 minute when selecting
clock source 1 second and setting counter value to 60) .
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
Supports automatic programming, Embedded Algorithm
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Dual operation Flash memory
Flash Security Feature for protecting the content of the Flash
Sleep, stop, watch, and timebase timer
MB95128MB
”
.
MB95F124MB
MB95F126MB
MB95F128MB
: 4 (Max)
: 40 (Max)
: 160 pixels can be displayed.
: 4 (Max)
“
8-bit PPG
MB95120MB Series
MB95F124NB
MB95F126NB
MB95F128NB
×
2 channels
”
or
MB95F124JB
MB95F126JB
MB95F128JB
“
16-bit PPG
×
5