LAN91C100FD-ST SMSC, LAN91C100FD-ST Datasheet - Page 50

• Manufacturer Part Number: LAN91C100FD-ST
• Description: Ethernet ICs Non-PCI 10/100 Ethernet MAC
• Manufacturer: SMSC
• Type: Single Chip MAC and PHY Controllerr

Specifications of LAN91C100FD-ST

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: 802.3
• Data Rate: 10 MB, 100 MB
• Supply Voltage (max): 7 V
• Supply Voltage (min): 0.3 V
• Supply Current (max): 40 mA
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-208
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note:
Revision 1.0 (09-22-08)
In this case, the transmit interrupt service routine can find the next packet number to be serviced by
reading the TX DONE PACKET NUMBER at the FIFO PORTS register. This eliminates the need for the
driver to keep a list of packet numbers being transmitted. The numbers are queued by the LAN91C100FD
and provided back to the CPU as their transmission completes.
2.
The pointer register is shared by any process accessing the LAN91C100FD memory. In order to allow
processes to be interruptable, the interrupting process is responsible for reading the pointer value before
modifying it, saving it, and restoring it before returning from the interrupt.
Typically there would be three processes using the pointer:
1.
2.
3.
1) and 3) also share the usage of the Packet Number Register. Therefore saving and restoring the PNR is
also required from interrupt service routines.
One interrupt per sequence of packets: Enable TX EMPTY INT and TX INT, set AUTO RELEASE=1.
TX EMPTY INT is generated only after transmitting the last packet in the FIFO.
TX INT will be set on a fatal transmit error allowing the CPU to know that the transmit process has
stopped and therefore the FIFO will not be emptied.
This mode has the advantage of a smaller CPU overhead, and faster memory de-allocation. Note that
when AUTO RELEASE=1 the CPU is not provided with the packet numbers that completed
successfully.
Transmit loading (sometimes interrupt driven)
Receive unloading (interrupt driven)
Transmit Status reading (interrupt driven).
DATASHEET
Page 50
FEAST Fast Ethernet Controller with Full Duplex Capability
SMSC LAN91C100FD Rev. D