PIC24EP64MC204-E/PT Microchip Technology, PIC24EP64MC204-E/PT Datasheet - Page 215

• Manufacturer Part Number: PIC24EP64MC204-E/PT
• Description: 16 Bit MCU, 64KB Flash, 8KB RAM, 60 MHz, 44 Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG
• Manufacturer: Microchip Technology

14.2
REGISTER 14-1:
 2011-2012 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-14
bit 13
bit 12-10
bit 9-7
bit 6-5
bit 4
bit 3
bit 2-0
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
U-0
U-0
—
—
Input Capture Registers
Unimplemented: Read as ‘0’
ICSIDL: Input Capture Stop in Idle Control bit
1 = Input capture will Halt in CPU Idle mode
0 = Input capture will continue to operate in CPU Idle mode
ICTSEL<12:10>: Input Capture Timer Select bits
111 = Peripheral clock (F
110 = Reserved
101 = Reserved
100 = T1CLK is the clock source of the ICx (only the synchronous clock is supported)
011 = T5CLK is the clock source of the ICx
010 = T4CLK is the clock source of the ICx
001 = T2CLK is the clock source of the ICx
000 = T3CLK is the clock source of the ICx
Unimplemented: Read as ‘0’
ICI<1:0>: Number of Captures per Interrupt Select bits
(this field is not used if ICM<2:0> = 001 or 111)
11 = Interrupt on every fourth capture event
10 = Interrupt on every third capture event
01 = Interrupt on every second capture event
00 = Interrupt on every capture event
ICOV: Input Capture Overflow Status Flag bit (read-only)
1 = Input capture buffer overflow occurred
0 = No input capture buffer overflow occurred
ICBNE: Input Capture Buffer Not Empty Status bit (read-only)
1 = Input capture buffer is not empty, at least one more capture value can be read
0 = Input capture buffer is empty
ICM<2:0>: Input Capture Mode Select bits
111 = Input capture functions as interrupt pin only in CPU Sleep and Idle mode (rising edge detect
110 = Unused (module disabled)
101 = Capture mode, every 16th rising edge (Prescaler Capture mode)
100 = Capture mode, every 4th rising edge (Prescaler Capture mode)
011 = Capture mode, every rising edge (Simple Capture mode)
010 = Capture mode, every falling edge (Simple Capture mode)
001 = Capture mode, every edge, rising and falling (Edge Detect mode (ICI<1:0>) is not used in this
000 = Input Capture module is turned off
R/W-0
U-0
—
ICxCON1: INPUT CAPTURE x CONTROL REGISTER 1
only, all other control bits are not applicable)
mode)
ICI<1:0>
HC = Cleared by Hardware
W = Writable bit
ICSIDL
R/W-0
R/W-0
P
) is the clock source of the ICx
R/HC/HS-0
R/W-0
ICOV
ICTSEL<2:0>
HS = Set by Hardware
U = Unimplemented bit, read as ‘0’
R/HC/HS-0
ICBNE
R/W-0
R/W-0
R/W-0
ICM<2:0>
R/W-0
‘0’ = Bit is cleared
U-0
—
DS70657F-page 215
R/W-0
U-0
—
bit 8
bit 0