PIC24EP64MC204-E/PT Microchip Technology, PIC24EP64MC204-E/PT Datasheet - Page 284

• Manufacturer Part Number: PIC24EP64MC204-E/PT
• Description: 16 Bit MCU, 64KB Flash, 8KB RAM, 60 MHz, 44 Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG
• Manufacturer: Microchip Technology

dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
REGISTER 20-1:
DS70657F-page 284
bit 5
bit 4
bit 3
bit 2-1
bit 0
Note 1:
2:
3:
4:
Refer to Section 17. “UART” (DS70582) in the “dsPIC33E/PIC24E Family Reference Manual” for infor-
mation on enabling the UART module for receive or transmit operation.
This feature is only available for the 16x BRG mode (BRGH = 0).
This feature is only available on 44-pin and 64-pin devices.
This feature is only available on 64-pin devices.
ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of a Sync field (55h)
0 = Baud rate measurement disabled or completed
URXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
BRGH: High Baud Rate Enable bit
1 = BRG generates 4 clocks per bit period (4x baud clock, High-Speed mode)
0 = BRG generates 16 clocks per bit period (16x baud clock, Standard mode)
PDSEL<1:0>: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
STSEL: Stop Bit Selection bit
1 = Two Stop bits
0 = One Stop bit
before other data; cleared in hardware upon completion
UxMODE: UART
x
MODE REGISTER (CONTINUED)
 2011-2012 Microchip Technology Inc.