PIC24EP64MC204-E/PT Microchip Technology, PIC24EP64MC204-E/PT Datasheet - Page 491

• Manufacturer Part Number: PIC24EP64MC204-E/PT
• Description: 16 Bit MCU, 64KB Flash, 8KB RAM, 60 MHz, 44 Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG
• Manufacturer: Microchip Technology

APPENDIX A:
Revision A (April 2011)
This is the initial released version of the document.
Revision B (July 2011)
This revision includes minor typographical and
formatting changes throughout the data sheet text.
All other major changes are referenced by their
respective section in
TABLE A-1:
 2011-2012 Microchip Technology Inc.
“High-Performance, 16-bit
Digital Signal Controllers
and Microcontrollers”
Section 4.0 “Memory
Organization”
Section 5.0 “Flash Program
Memory”
Section 9.0 “Oscillator
Configuration”
Section 22.0 “Charge Time
Measurement Unit (CTMU)”
Section 25.0 “Op amp/
Comparator Module”
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
Section Name
MAJOR SECTION UPDATES
Table
REVISION HISTORY
A-1.
Changed all pin diagrams references of VLAP to TLA.
Updated the All Resets values for CLKDIV and PLLFBD in the System Control
Register Map (see Table 4-35).
Updated “one word” to “two words” in the first paragraph of Section 5.2 “RTSP
Operation”.
Updated the PLL Block Diagram (see Figure 9-2).
Updated the Oscillator Mode, Fast RC Oscillator (FRC) with divide-by-N and PLL
(FRCPLL), by changing (FRCDIVN + PLL) to (FRCPLL).
Changed (FRCDIVN + PLL) to (FRCPLL) for COSC<2:0> = 001 and
NOSC<2:0> = 001 in the Oscillator Control Register (see Register 9-1).
Changed the POR value from 0 to 1 for the DOZE<1:0> bits, from 1 to 0 for the
FRCDIV<0> bit, and from 0 to 1 for the PLLPOST<0> bit; Updated the default
definitions for the DOZE<2:0> and FRCDIV<2:0> bits and updated all bit definitions
for the PLLPOST<1:0> bits in the Clock Divisor Register (see Register 9-2).
Changed the POR value from 0 to 1 for the PLLDIV<5:4> bits and updated the default
definitions for all PLLDIV<8:0> bits in the PLL Feedback Division Register (see
Register 9-2).
Updated the bit definitions for the IRNG<1:0> bits in the CTMU Current Control
Register (see Register 22-3).
Updated the voltage reference block diagrams (see Figure 25-1 and Figure 25-2).
Update Description
DS70657F-page 491