M28529G-12 Mindspeed Technologies, M28529G-12 Datasheet - Page 299

• Manufacturer Part Number: M28529G-12
• Description: ATM IMA 8.192Mbps 1.8V/3.3V 484-Pin BGA
• Manufacturer: Mindspeed Technologies

Specifications of M28529G-12

• Package: 484BGA
• Utopia Type: Level 2
• Typical Operating Supply Voltage: 1.8|3.3 V
• Minimum Operating Supply Voltage: 1.71|3.135 V
• Maximum Operating Supply Voltage: 1.89|3.465 V
• Maximum Output Rate: 8.192 Mbps

Table 4-6.
28529-DSH-001-K
IIO.22
IIO.23
IIO.24
IIO.25
IIO.26
IIO.27
IIO.28
IIO.29
IIO.30
IIO.31
IIO.32
IIO.33
IIO.34
IIO.35
IIO.36
IIO.37
IIO.38
IIO.39
IIO.40
IIO.41
Item
Does the implementation ensure that at least P
direction and P
state before moving the GSM into the Operational state?
Does the implementation ensure that P
Does the implementation ensure that P
Does the implementation ensure that P
configured in the Symmetrical Configuration and Operation mode?
Does the implementation allow configuration of the value of P
Does the implementation allow configuration of the value of P
Does the implementation report the Config-Aborted state for at least one
second when the configuration requested by the FE is unacceptable?
Does the implementation support the GSM state transitions as defined in 13
on page 60?
Does the implementation determine and report that the group is up when
both the local and remote GSMs are Operational?
Does the implementation determine and report that the group is down when
either the local or the remote GSM is not operational?
Does the implementation report the proper reasons why the GSM is not
operational?
Does the implementation report the highest priority reason according to
Table 14 on page 61?
Does the implementation report the entrance of the GTSM into the Down
state to the UM and ATM Layer Management?
Is the report of the entrance of the GTSM into the Down state the only
notification to the ATM Layer Management about Physical Layer defects or
failures?
Does the implementation report the return of the GTSM to the Up state to
the UM and ATM Layer Management?
Does the implementation ensure it does not drop any ATM layer cells when
adding or recovering links while the GSM is maintained in the Operational
state?
Does the implementation ensure that it does not drop any ATM layer cells
when deleting or inhibiting links while the GSM is maintained in the
Operational state?
When running the group start-up procedure, does the implementation
ensure that all accepted links have their states changed to Tx=Usable in the
same update of the ICP cell?
When running the group start-up procedure and after the Tx state of all
accepted links has been reported in a previous update of the ICP cell, does
the implementation ensure that all accepted links have their states changed
to Rx=Active in the same update of the ICP cell?
When running the group start-up procedure and after the Rx state of all
accepted links has been reported in a previous update of the ICP cell, does
the implementation ensure that all accepted links have their states changed
to Tx=Active in the same update of the ICP cell?
IMA Interface Operation (IIO) Functions (3 of 4)
Rx
links in the received direction can be moved into the Active
Protocol feature
Mindspeed Proprietary and Confidential
Mindspeed Technologies
Tx
Rx
Tx
is greater than zero?
and P
is greater than zero?
Tx
Rx
links in the transmit
are equal when the
Tx
Rx
?
?
®
Cond. for
Status
Status
Pred.
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
O
O
(R-87)
(R-88)
(R-88)
(R-89)
(O-15)
(O-15)
(R-90)
(R-91)
(R-92)
(R-92)
(R-92)
(R-92)
(R-93)
(R-93)
(R-94)
(R-95)
(R-96)
(R-97)
(R-98)
(R-99)
Ref.
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Appendices
Support
284