ATtiny461A Atmel Corporation, ATtiny461A Datasheet - Page 62

• Manufacturer Part Number: ATtiny461A
• Manufacturer: Atmel Corporation

Specifications of ATtiny461A

• Flash (kbytes): 4 Kbytes
• Pin Count: 20
• Max. Operating Frequency: 20 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 8
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 16
• Ext Interrupts: 16
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 11
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 0.25
• Eeprom (bytes): 256
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8 to 5.5
• Operating Voltage (vcc): 1.8 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 6
• Input Capture Channels: 1
• Pwm Channels: 6
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

10.2.1
62
ATtiny261A/461A/861A
Alternate Functions of Port A
The Port A pins with alternate function are shown in
Table 10-3.
• Port A, Bit 7 – ADC6/AIN0/PCINT7
• Port A, Bit 6 – ADC5/AIN1/PCINT6
• ADC6: Analog to Digital Converter, Channel 6
• AIN0: Analog Comparator Input. Configure the port pin as input with the internal pull-up
• PCINT7: Pin Change Interrupt source 8.
• ADC5: Analog to Digital Converter, Channel 5.
• AIN1: Analog Comparator Input. Configure the port pin as input with the internal pull-up
• PCINT6: Pin Change Interrupt source 6.
switched off to avoid the digital port function from interfering with the function of the Analog
Comparator.
switched off to avoid the digital port function from interfering with the function of the Analog
Comparator.
Port Pin
PA7
PA6
PA5
PA4
PA3
PA2
PA1
PA0
Port B Pins Alternate Functions
Alternate Function
ADC6:
AIN0:
PCINT7: Pin Change Interrupt 0, Source 7
ADC5:
AIN1:
PCINT6: Pin Change Interrupt 0, Source 6
ADC4:
AIN2:
PCINT5: Pin Change Interrupt 0, Source 5
ADC3:
ICP0:
PCINT4: Pin Change Interrupt 0, Source 4
AREF:
PCINT3: Pin Change Interrupt 0, Source 3
ADC2:
INT1:
USCK: USI Clock (Three Wire Mode)
SCL :
PCINT2: Pin Change Interrupt 0, Source 2
ADC1:
DO:
PCINT1:Pin Change Interrupt 0, Source 1
ADC0:
DI:
SDA:
PCINT0: Pin Change Interrupt 0, Source 0
ADC Input Channel 6
Analog Comparator Input
ADC Input Channel 5
Analog Comparator Input
ADC Input Channel 4
Analog Comparator Input
ADC Input Channel 3
Timer/Counter0 Input Capture Pin
External Analog Reference
ADC Input Channel 2
External Interrupt 1 Input
USI Clock (Two Wire Mode)
ADC Input Channel 1
USI Data Output (Three Wire Mode)
ADC Input Channel 0
USI Data Input (Three Wire Mode)
USI Data Input (Two Wire Mode)
.
Table
10-3.
8197C–AVR–05/11