HD6412332 RENESAS [Renesas Technology Corp], HD6412332 Datasheet - Page 284

• Manufacturer Part Number: HD6412332
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

7.5.6
In normal mode, transfer is performed with channels A and B used in combination. Normal mode
can be specified by setting the FAE bit in DMABCR to 1 and clearing the BLKE bit in DMACRA
to 0.
In normal mode, MAR is updated after each byte or word transfer in response to a single transfer
request, and this is executed the number of times specified in ETCRA. The transfer source is
specified by MARA, and the transfer destination by MARB.
Table 7.10 summarizes register functions in normal mode.
Table 7.10 Register Functions in Normal Mode
Register
23
23
Legend:
MARA: Memory address register A
MARB: Memory address register B
ETCRA: Execute transfer count register A
MARA and MARB specify the start addresses of the transfer source and transfer destination,
respectively, as 24 bits. MAR can be incremented or decremented by 1 or 2 each time a byte or
word is transferred, or can be fixed.
Incrementing, decrementing, or holding a fixed value can be set separately for MARA and
MARB.
The number of transfers is specified by ETCRA as 16 bits. ETCRA is decremented each time a
transfer is performed, and when its value reaches H'0000 the DTE bit is cleared and transfer ends.
If the DTIE bit is set to 1 at this time, an interrupt request is sent to the CPU or DTC.
The maximum number of transfers, when H'0000 is set in ETCRA, is 65,536.
Rev.4.00 Sep. 07, 2007 Page 254 of 1210
REJ09B0245-0400
15
Normal Mode
MARA
MARB
ETCRA
0
0
0
Function
Source address
register
Destination
address register
Transfer counter Number of transfers Decremented every
Initial Setting
Start address of
transfer source
Start address of
transfer destination
Operation
Incremented/decremented
every transfer, or fixed
Incremented/decremented
every transfer, or fixed
transfer; transfer ends
when count reaches
H'0000