HD6412332 RENESAS [Renesas Technology Corp], HD6412332 Datasheet - Page 750

• Manufacturer Part Number: HD6412332
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Permissible Signal Source Impedance: The chip’s analog input is designed so that conversion
precision is guaranteed for an input signal for which the signal source impedance is 5 kΩ or less.
This specification is provided to enable the A/D converter’s sample-and-hold circuit input
capacitance to be charged within the sampling time; if the sensor output impedance exceeds 5 kΩ,
charging may be insufficient and it may not be possible to guarantee the A/D conversion
precision.
If a large capacitance is provided externally, the input load will essentially comprise only the
internal input resistance of 10 kΩ, and the signal source impedance is ignored. However, since a
low-pass filter effect is obtained in this case, it may not be possible to follow an analog signal with
a large differential coefficient (e.g., 5 mV/µs or greater).
When converting a high-speed analog signal, a low-impedance buffer should be inserted.
Influences on Absolute Precision: Adding capacitance results in coupling with GND, and
therefore noise in GND may adversely affect absolute precision. Be sure to make the connection to
an electrically stable GND such as AV
Care is also required to insure that filter circuits do not communicate with digital signals on the
mounting board, so acting as antennas.
Rev.4.00 Sep. 07, 2007 Page 720 of 1210
REJ09B0245-0400
Sensor input
Note: Values are reference values.
Sensor output
impedance
Max. 5 kΩ
Low-pass
filter C
to 0.1 µF
Figure 16.10 Example of Analog Input Circuit
SS
.
Chip
C
in
= 15 pF
A/D converter
equivalent circuit
10 kΩ
20 pF