C8051F360DK Silicon Laboratories Inc, C8051F360DK Datasheet - Page 18

• Manufacturer Part Number: C8051F360DK
• Description: KIT DEV FOR C8051F360 FAMILY
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F360DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F36x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F360, F361, F362, F363, F364, F365, F366, F367, F368, F369
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1410

C8051F360/1/2/3/4/5/6/7/8/9
1.
C8051F36x devices are fully integrated mixed-signal System-on-a-Chip MCUs. Highlighted features are
listed below. Refer to Table 1.1 for specific product feature selection.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
With on-chip Power-On Reset, V
are truly stand-alone System-on-a-Chip solutions. The Flash memory can be reprogrammed even in-cir-
cuit, providing non-volatile data storage, and also allowing field upgrades of the 8051 firmware. User soft-
ware has complete control of all peripherals, and may individually shut down any or all peripherals for
power savings.
The on-chip Silicon Labs 2-Wire (C2) Development Interface allows non-intrusive (uses no on-chip
resources), full speed, in-circuit debugging using the production MCU installed in the final application. This
debug logic supports inspection and modification of memory and registers, setting breakpoints, single
stepping, run and halt commands. All analog and digital peripherals are fully functional while debugging
using C2. The two C2 interface pins can be shared with user functions, allowing in-system debugging with-
out occupying package pins.
Each device is specified for 3.0 to 3.6 V (100 MIPS) operation or 2.7 to 3.6 V (50 MIPS) operation over the
industrial temperature range (–40 to +85 °C). The Port I/O and RST pins are tolerant of input signals up to
5 V. The C8051F36x devices are available in 48-pin TQFP packages, and C8051F36x devices are avail-
able in 32-pin LQFP and 28-pin QFN packages (also referred to as MLP or MLF packages). All package
types are lead-free (RoHS compliant). See Table 1.1 for ordering part numbers. Block diagrams are
included in Figure 1.1, Figure 1.2, and Figure 1.3.
18
High-speed pipelined 8051-compatible microcontroller core (up to 100 MIPS)
In-system, full-speed, non-intrusive debug interface (on-chip)
True 10-bit 200 ksps 16-channel single-ended/differential ADC with analog multiplexer
10-bit Current Output DAC
2-cycle 16 by 16 Multiply and Accumulate Engine
Precision programmable 25 MHz internal oscillator
Up to 32 kB of on-chip Flash memory—1024 bytes are reserved
1024 bytes of on-chip RAM
External Data Memory Interface with 64 kB address space
SMBus/I2C, Enhanced UART, and Enhanced SPI serial interfaces implemented in hardware
Four general-purpose 16-bit timers
Programmable Counter/Timer Array (PCA) with six capture/compare modules and Watchdog Timer
function
On-chip Power-On Reset, V
Two on-chip Voltage Comparators
up to 39 Port I/O (5 V tolerant)
System Overview
DD
DD
Monitor, and Temperature Sensor
Monitor, Watchdog Timer, and clock oscillator, the C8051F36x devices
Rev. 1.0