MPC8536DS Freescale Semiconductor, MPC8536DS Datasheet - Page 121

• Manufacturer Part Number: MPC8536DS
• Description: BOARD DEV SYSTEM MPC8536E
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC III™r
• Type: MPUr

Specifications of MPC8536DS

• Contents: Board, Software and Documentation
• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 667 MHz
• Operating Supply Voltage: - 0.3 V to + 1.21 V
• Maximum Operating Temperature: + 105 C
• Data Ram Size: 32 KB
• Interface Type: SPI, USB
• Program Memory Type: DDR2, DDR3, SDRAM
• Core Size: 32 Bit
• Program Memory Size: 544KB
• Cpu Speed: 1.5GHz
• Digital Ic Case Style: BGA
• No. Of Pins: 783
• Supply Voltage Range: 0.95V To 1.05V
• Rohs Compliant: Yes
• For Use With/related Products: MPC8536
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The following pins must be connected to XGND if not used:
3.11.3
If the high-speed SerDes 2 interface (SGMII/ SATA) is not used at all, the unused pin should be terminated as described in this
section. See SerDes2 in
The following pins must be left unconnected (float):
The following pins must be connected to X2GND:
The POR configuration pin cfg_srds2_prtcl[0:2] on TSEC1_TXD[2], TSEC3_TXD[2], TSEC_1588_PUSLE_OUT1 can be
used to power down SerDes 2 block for power saving. Note that both S2VDD and X2VDD must remain powered.
3.11.4
If only part of the high speed SerDes 2 (SGMII/SATA) interface pins are used, the remaining high-speed serial I/O pins should
be terminated as described in this section.
The following pins must be left unconnected (float) if not used:
The following pins must be connected to X2GND if not used:
4
Ordering information for the parts fully covered by this specification document is provided in
Addressed by This Document.”
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SD1_RX[7:0]
SD1_RX[7:0]
SD1_REF_CLK
SD1_REF_CLK
SD2_TX[1:0]
SD2_TX[1:0]
Reserved pins L8, L9
SD2_RX[1:0]
SD2_RX[1:0]
SD2_REF_CLK
SD2_REF_CLK
SD2_TX[1:0]
SD2_TX[1:0]
Reserved pins: T22, T23
SD2_RX[1:0]
SD2_RX[1:0]
Ordering Information
SerDes 2 Interface Entirely Unused
SerDes 2 Interface Partly Unused
MPC8536E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 3
Table 1
for details.
Guidelines for High-Speed Interface Termination
Section 4.1, “Part Numbers Fully
121