C8051F352-GQR Silicon Laboratories Inc, C8051F352-GQR Datasheet - Page 93

• Manufacturer Part Number: C8051F352-GQR
• Description: IC 8051 MCU 8K FLASH 32LQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F35xr

Specifications of C8051F352-GQR

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x16b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Core: 8051
• Processor Series: C8051F3x
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 768 B
• Data Rom Size: 128 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 17
• Number Of Timers: 4 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 16 bit
• A/d Channels Available: 8
• Height: 1.4 mm
• Interface Type: I2C, SMBus, SPI, UART
• Length: 7 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Width: 7 mm
• For Use With: 336-1083 - DEV KIT FOR F350/351/352/353
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

10.2. Register Descriptions
Following are descriptions of SFRs related to the operation of the CIP-51 System Controller. Reserved bits
should not be set to logic l. Future product versions may use these bits to implement new features in which
case the reset value of the bit will be logic 0, selecting the feature's default state. Detailed descriptions of
the remaining SFRs are included in the sections of the datasheet associated with their corresponding sys-
tem function.
Bits7–0: SP: Stack Pointer.
Bits7–0: DPL: Data Pointer Low.
Bits7–0: DPH: Data Pointer High.
R/W
R/W
R/W
Bit7
Bit7
Bit7
The Stack Pointer holds the location of the top of the stack. The stack pointer is incremented
before every PUSH operation. The SP register defaults to 0x07 after reset.
The DPL register is the low byte of the 16-bit DPTR. DPTR is used to access indirectly
addressed XRAM and Flash memory.
The DPH register is the high byte of the 16-bit DPTR. DPTR is used to access indirectly
addressed XRAM and Flash memory.
R/W
R/W
R/W
Bit6
Bit6
Bit6
SFR Definition 10.3. DPH: Data Pointer High Byte
SFR Definition 10.2. DPL: Data Pointer Low Byte
R/W
R/W
R/W
SFR Definition 10.1. SP: Stack Pointer
Bit5
Bit5
Bit5
R/W
R/W
R/W
Bit4
Bit4
Bit4
Rev. 1.1
R/W
R/W
R/W
Bit3
Bit3
Bit3
R/W
R/W
R/W
Bit2
Bit2
Bit2
C8051F350/1/2/3
R/W
R/W
R/W
Bit1
Bit1
Bit1
SFR Address: 0x83
SFR Address: 0x81
SFR Address: 0x82
R/W
R/W
R/W
Bit0
Bit0
Bit0
00000000
Reset Value
Reset Value
00000111
00000000
Reset Value
93