S9S08DZ60F1MLH Freescale Semiconductor, S9S08DZ60F1MLH Datasheet - Page 289

• Manufacturer Part Number: S9S08DZ60F1MLH
• Description: MCU 60K FLASH MASK AUTO 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of S9S08DZ60F1MLH

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Processor Series: S08D
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08DZ60
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 24 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 14
Serial Communications Interface (S08SCIV4)
14.1
All MCUs in the MC9S08DZ60 Series include SCI1 and SCI2.
14.1.1
The SCI2 module pins, TxD2 and RxD2 can be repositioned under software control using SCI2PS in
SOPT1 as shown in
with SCI2 operation.
Freescale Semiconductor
Introduction
SCI2 Configuration Information
•
•
MC9S08DZ60 Series devices operate at a higher voltage range (2.7 V to
5.5 V) and do not include stop1 mode. Please ignore references to stop1.
The RxD1 pin does not contain a clamp diode to V
driven above V
RxD1 pin may be as low as V
to this pin are pulled all the way to V
Table
SCI2PS in SOPT1
0 (default)
14-1. SCI2PS in SOPT1 selects which general-purpose I/O ports are associated
1
DD
MC9S08DZ60 Series Data Sheet, Rev. 4
Table 14-1. SCI2 Position Options
. The voltage measured on the internally pulled up
Port Pin for TxD2
DD
NOTE
PTF0
PTE6
– 0.7 V. The internal gates connected
DD
.
Port Pin for RxD2
DD
and should not be
PTF1
PTE7
289