X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 123

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Built-In Command Settings
A number of Built-In Commands are supported for execution via SMS messages sent to your Digi
device. Descriptions of built-in command-related settings for the SMS feature follow. Full detailed
descriptions of the SMS command syntax and supported command options is available on the Digi
support web site.
Supported commands
The following commands are supported.
Command options
For each built-in command, the following options are supported:


#help (alias #?)
#cli
#idigi
(alias #cwm)
#ping
Enable
The command is enabled for use via SMS. All commands are enabled by default.
Password
The configured password must be specified on the command message for that message
to be accepted for further processing. If a command-specific password is configured,
that command-specific password must be provided instead of the global command
password (if one is configured, see Global SMS Command Password above).
Specifically, a command-specific password overrides the global password, and the
global password is not considered if a command-specific password is configured in the
settings. This option is disabled (no command password required) by default. To remove
the password, simply clear the password field on the settings page.
command
Built-in
The Digi device replies to the sender via SMS with a message that specifies the
command syntax and a list of the supported, available commands that may be sent to
this device. You may obtain further help for a specific command by sending that
command as a parameter. E.g., send “#help ping” to request a help reply for the
“#ping” built-in command.
Request that a CLI command be run on the Digi device. The output from the CLI
command is returned to the sender via SMS, with a limit of around 2000 characters
for the number of CLI output characters returned in the reply.
Manage or obtain status for a device connection to a Digi iDigi (Connectware
Manager) server. The Digi device replies to the sender via SMS with a message that
contains the status or result of the requested action.
Request that the Digi device reply to the sender via SMS to verify two-way SMS
communication between the sender and the Digi device.
Description
C o n f i g u r e D i g i d e v i c e s
1 2 3