X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 246

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

configuration management
coordinator
CTS
device server
Digi Device Setup Wizard
DSR
DTR
Dynamic Host Configuration Protocol (DHCP)
EIA
Managing the files and settings that contain device configuration information. Configuration
management tasks include copying device configuration files to and from a remote host,
upgrading device firmware, and resetting the device configuration to factory defaults.
In XBee networks, a coordinator is node that has the unique function of forming a network. The
coordinator is responsible for establishing the operating channel and PAN ID for an entire
network. Once established, the coordinator can form a network by allowing routers and end
devices to join to it. Once the network is formed, the coordinator functions like a router (it can
participate in routing packets and be a source or destination for data packets). Characteristics of
coordinators include:
In the web interface, a coordinator is also referred to as a gateway device.
Clear to Send.
A one- or two-port intelligent network device that converts serial data into network data.
A wizard for configuring Digi devices that is available from the Digi Support site and on the
Software and Documentation CD shipped with each Digi device. The Digi Device Setup Wizard
is available in Microsoft Windows or UNIX platforms. It assigns an IP address for the device,
configures the device based on your description of the device environment, and determines
whether you need to install RealPort. Using the Digi Device Setup Wizard is the recommended
and preferred method for configuration.
Data Set Ready.
Data Terminal Ready.
An Internet protocol for automating the configuration of computers that use TCP/IP. DHCP can
be used to automatically assign IP addresses, to deliver TCP/IP stack configuration parameters
such as the subnet mask and default router, and to provide other configuration information.
See Electronics Industry Association.
–
–
–
–
–
One Coordinator per PAN
Establishes/Organizes PAN
Can route data packets to/from other nodes
Can be a data packet source and destination
Mains-powered
2 4 6