X2-Z11-E-A Digi International, X2-Z11-E-A Datasheet - Page 195

• Manufacturer Part Number: X2-Z11-E-A
• Description: CONNECTPORT X2 2.4GHZ
• Manufacturer: Digi International
• Series: ConnectPort™ X2r

Specifications of X2-Z11-E-A

• Function: Transceiver, Xbee, Gateway
• Modulation Or Protocol: UDP/TCP, DHCP, SNMPv1
• Frequency: 2.4GHz
• Applications: General Purpose
• Interface: RJ-45
• Sensitivity: -82dBm
• Power - Output: 16dBm
• Data Rate - Maximum: 11Mbps
• Voltage - Supply: 12VDC
• Wireless Frequency: 2.4 GHz
• Interface Type: Ethernet
• Modulation: DBPSK, DQPSK
• Security: SSL Tunnel
• Operating Voltage: 9 V to 30 V
• Output Power: 1.2 W
• Antenna: 4 in Dipole
• Operating Temperature Range: - 30 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1173

Current Network Gateway Status (Non-Failover)
Interface Table
Gateway
This information reports the status of the non-failover management of the default gateway.
If Network Failover is enabled (On) and can successfully configure a default gateway,
failover always overrides the non-failover Gateway Priority configuration.
The current status of all available IP network interfaces. The table is displayed in order of the
interface priority configured in the Advanced Network Settings. For each network interface,
the following information is displayed:
The interface list is maintained in the Interface Priority order configured by the user in the
Advanced Network Settings. When any interface changes status, the interface list is
examined for the interface that has the highest status priority, nearest the start of the list. The
highest priority interface with an Up status is used as the default gateway.
The gateway IP address associated with the interface, or 0.0.0.0 if the interface does not have
an associated gateway. An interface with no gateway is not suitable for use as the default
gateway.
Settings. The highest priority is 1, which is the first interface in the configured
Advanced Network Settings Interface Priority list.
meanings:
for use as the default gateway.
not suitable for use as the default gateway.
Priority: The priority of the interface configured in the Advanced Network
Interface: The name of the network interface.
Status: The current status of this network interface. Possible status values and their
1 - Up: The interface is Up and configured in the system. This interface is suitable
0 - Down: The interface is Down or not configured in the system. This interface is
M o n i t o r a n d m a n a g e D i g i d e v i c e s
1 9 5