MC13224V Freescale Semiconductor, MC13224V Datasheet - Page 2

• Manufacturer Part Number: MC13224V
• Description: ZIGBEE PLATFORM 802.15.4 145-LGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13224V

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -100dBm
• Voltage - Supply: 2 V ~ 3.6 V
• Current - Receiving: 24mA
• Current - Transmitting: 29mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 96kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 145-LGA
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2.4 GHz
• Interface Type: 4-Wire SPI, I2C
• Output Power: 1.5 dBm
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 31 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• No. Of Pins: 99
• Supply Voltage Range: 2V To 3.6V
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 3 - 168 Hours
• A/d Converter: 12 Bits
• No. Of Timers 8/12/16/32 Bits: 0 / 0 / 4 / 0
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

communications stack software. A full set of peripherals and Direct Memory Access (DMA) capability for
transceiver packet data complement the processor core.
The RF radio interface provides for low cost and the high density as shown in
along with a TX/RX switch allows direct connection to a single-ended 50-Ω antenna. The integrated PA
provides programmable output power typically from -30 dBm to +4 dBm, and the RX LNA provides
-96 dBm sensitivity. In addition, separate complementary PA outputs allow use of an external PA and/or
an external LNA for extended range applications. The device also has onboard bypass capacitors and
crystal load capacitors for the smallest footprint in the industry. All components are integrated into the
package except the crystal and antenna.
In addition to the best-in-class MCU performance and power, the MC1322x also provides best-in-class
power savings. Typical transmit current is 29 mA and typical receive current is 22 mA with the CPU at 2
MHz operation and even lower with the bus stealing enabled. Onboard power supply regulation is
provided for source voltages from 2.0 Vdc to 3.6 Vdc. Numerous low current modes are available to
maximize battery life including sleep or restricted performance operation.
Applications include, but are not limited to, the following:
2
•
•
Residential and commercial automation
— Lighting control
— Security
— Access control
— Heating, ventilation, air-conditioning (HVAC)
— Automated meter reading (AMR)
Industrial Control
BALUN
Figure 1. MC1322x RF Radio Interface
SWITCH
TX/RX
RF
MC1322x Technical Data, Rev. 1.3
LNA
PA
TRANSMITTER
RECEIVER
ANALOG
ANALOG
Figure
Freescale Semiconductor
1. An onboard balun