MC13224V Freescale Semiconductor, MC13224V Datasheet - Page 8

• Manufacturer Part Number: MC13224V
• Description: ZIGBEE PLATFORM 802.15.4 145-LGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13224V

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -100dBm
• Voltage - Supply: 2 V ~ 3.6 V
• Current - Receiving: 24mA
• Current - Transmitting: 29mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 96kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 145-LGA
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2.4 GHz
• Interface Type: 4-Wire SPI, I2C
• Output Power: 1.5 dBm
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 31 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• No. Of Pins: 99
• Supply Voltage Range: 2V To 3.6V
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 3 - 168 Hours
• A/d Converter: 12 Bits
• No. Of Timers 8/12/16/32 Bits: 0 / 0 / 4 / 0
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.3.3
The SynkroRF Network is a general purpose, proprietary networking layer that sits on top of the IEEE
802.15.4 MAC and PHY layers. It is designed for Wireless Personal Area Networks (WPANs) and
conveys information over short distances among the participants in the network. It enables small, power
efficient, inexpensive solutions to be implemented for a wide range of applications. Some key
characteristics of an SynkroRF Network are:
The SynkroRF Network layer uses components from the standard HC(S)08 Freescale platform, which is
also used by the Freescale’s implementations of 802.15.4. MAC and ZigBee™ layers. For more details
about the platform components, see the Freescale Platform Reference Manual.
2.3.4
Freescale has two independent codebases to support the two ZigBee standard specifications:
2.3.4.1
Freescale’s BeeStack architecture implements the ZigBee-2007 protocol stack including both
Stack Profile 1 and Stack Profile 2 (Pro). Based on the OSI Seven-Layer model, the ZigBee stack ensures
inter-operability among networked devices. The physical (PHY), media access control (MAC), and
network (NWK) layers create the foundation for the application (APL) layers. BeeStack defines additional
services to improve the communication between layers of the protocol stack.
At the Application Layer, the application support layer (ASL) facilitates information exchange between
the Application Support Sub-Layer (APS) and application objects. Finally, ZigBee Device Objects (ZDO),
in addition to other manufacturer-designed applications, allow for a wide range of useful tasks applicable
to home and industrial automation.
8
•
•
•
•
•
•
•
•
•
•
•
•
802.15.4 Receiver Frame filtering.
Binaries and application examples provided
An over-the-air data rate of 250 kbit/s in the 2.4 GHz band.
3 independent communication channels in the 2.4 GHz band (15, 20, and 25).
2 network node types, controller and controlled nodes.
Channel Agility mechanism.
Low Latency Tx mode automatically enabled in conditions of radio interference.
Fragmented mode transmission and reception, automatically enabled in conditions of radio
interference.
Robustness and ease of use.
Essential functionality to build and support a CE network.
BeeStack™ - supports ZigBee-2007 and ZigBee Pro extensions
BeeStack Consumer - supports ZigBee RF4CE
SynkroRF Platform
ZigBee-Based Stacks
BeeStack
MC1322x Technical Data, Rev. 1.3
Freescale Semiconductor
®