MC13224V Freescale Semiconductor, MC13224V Datasheet - Page 20

• Manufacturer Part Number: MC13224V
• Description: ZIGBEE PLATFORM 802.15.4 145-LGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13224V

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -100dBm
• Voltage - Supply: 2 V ~ 3.6 V
• Current - Receiving: 24mA
• Current - Transmitting: 29mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 96kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 145-LGA
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2.4 GHz
• Interface Type: 4-Wire SPI, I2C
• Output Power: 1.5 dBm
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 31 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• No. Of Pins: 99
• Supply Voltage Range: 2V To 3.6V
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 3 - 168 Hours
• A/d Converter: 12 Bits
• No. Of Timers 8/12/16/32 Bits: 0 / 0 / 4 / 0
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.1
The parallel I/O features include:
5.2
The MC1322x designates 8 pins (KBI_0 to KBI_7) as a keyboard interface, where four of these signals
typically are outputs and four are inputs (KBI_4 to KBI_7) that support interrupts. These 8 pins could
typically be used as a matrix interface to support up to 16 switches or buttons, such as a keypad. These
signals can also be used as general purpose IO if a keyboard is not present.
During Hibernate or Doze, the KBI are unique in that they are kept alive. Four KBI are outputs and four
KBI are inputs. The inputs can be enabled as asynchronous interrupts to wake-up the MC1322x from the
sleep mode.
20
•
•
•
•
•
•
A total of 64 general-purpose I/O pins
Individual control (direction and output state) for each pin when in GPIO mode
Pad hysteresis enables
Software-controlled pull-ups/pull-downs on each input pin
When not used as GPIO, the IO provide alternative functions
— Debug ports for JTAG (four signals) and Nexus (fourteen signals) modules
— Four control signals for external RF components such as an LNA, PA, and antenna switch
— Eight analog inputs for ADC input channels
— Four signals for ADC reference voltages
— Eight signals for UART1 and UART2
— Two I
— Four timer block signals
— Four SPI block signals
— Four SSI block signals
— Eight KBI signals
Eight KBI pins are kept alive during Hibernate or Doze. Four KBI are output and four are inputs.
The input can be used as wake-up interrupts
Parallel IO (GPIO)
Keyboard Interface (KBI)
2
C signals
MC1322x Technical Data, Rev. 1.3
Freescale Semiconductor