MC13224V Freescale Semiconductor, MC13224V Datasheet - Page 5

• Manufacturer Part Number: MC13224V
• Description: ZIGBEE PLATFORM 802.15.4 145-LGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13224V

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -100dBm
• Voltage - Supply: 2 V ~ 3.6 V
• Current - Receiving: 24mA
• Current - Transmitting: 29mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 96kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 145-LGA
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2.4 GHz
• Interface Type: 4-Wire SPI, I2C
• Output Power: 1.5 dBm
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 31 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• No. Of Pins: 99
• Supply Voltage Range: 2V To 3.6V
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 3 - 168 Hours
• A/d Converter: 12 Bits
• No. Of Timers 8/12/16/32 Bits: 0 / 0 / 4 / 0
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.2
Freescale Semiconductor
•
•
•
•
•
•
•
•
IEEE 802.15.4 standard compliant on-chip transceiver/modem
— 2.4 GHz ISM Band operation
— 16 selectable channels
— Programmable transmitter output power (-30 dBm to +4 dBm typical)
— World-class receiver sensitivity
Hardware acceleration for IEEE 802.15.4 applications
— MAC accelerator (sequencer and DMA interface)
— Advanced encryption/decryption hardware engine (AES 128-bit)
Supports standard IEEE 802.15.4 signaling with 250 kbps data rate
32-bit ARM7TDMI-S CPU core with programmable performance up to 26 MHz (24 MHz typical)
Extensive on-board memory resources
— 128 Kbyte serial FLASH memory (will be mirrored into RAM)
— 96 Kbyte SRAM
— 80 Kbyte ROM
Best-in-class power dissipation
— 22 mA typical RX current draw (DCD mode) with radio and MCU active
— 29 mA typical TX current draw with radio and MCU active (coin cell capable)
— 3.3 mA typical current draw with MCU active (radio off)
— 0.8 mA typical current with MCU idle (radio off)
— 0.85 μA typical Hibernate current (retain 8 Kbyte SRAM contents)
— 0.4 μA maximum Off current (device in reset)
Extensive sleep mode control and variation
— Hibernate and Doze low power modes
— Programmable degree of power down
— Clock management
— Onboard 2 kHz oscillator for wake-up timer.
— Optional 32.768 kHz crystal oscillator for accurate real-time sleep mode timing and wake-up
— Wake-up through programmable timer, external real-time interrupts, or ADC timer
Extensive MCU peripherals set
— Dedicated 802.15.4 modem/radio interface module (RIF)
— Dedicated NVM SPI interface for managing FLASH memory
— Two dedicated UART modules capable of 2 Mbps with CTS/RTS support
— SPI port with programmable master and slave operation
Features Summary
– < -96 dBm typical receiver sensitivity using DCD mode (<1% PER, 20-byte packets)
– < -100 dBm typical receiver sensitivity using NCD mode (<1% PER, 20-byte packets)
with a possible sleep period greater than 36.4 hours
MC1322x Technical Data, Rev. 1.3
5