LPC2420FET208,551 NXP Semiconductors, LPC2420FET208,551 Datasheet - Page 31

• Manufacturer Part Number: LPC2420FET208,551
• Description: IC ARM7 MCU 16BIT T208FBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2420FET208,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: EBI/EMI, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Type: ROMless
• Ram Size: 82K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-TFBGA
• Processor Series: LPC2420
• Core: ARM7
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: SPI, I2C, I2S, USB, SSP
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Processor To Be Evaluated: ARM7TDMI-S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Size: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-5216

NXP Semiconductors
LPC2420_60_5
Preliminary data sheet
7.9.1 Features
7.9 Ethernet (LPC2460 only)
The Ethernet block contains a full featured 10 Mbit/s or 100 Mbit/s Ethernet MAC
designed to provide optimized performance through the use of DMA hardware
acceleration. Features include a generous suite of control registers, half or full duplex
operation, flow control, control frames, hardware acceleration for transmit retry, receive
packet filtering and wake-up on LAN activity. Automatic frame transmission and reception
with scatter-gather DMA off-loads many operations from the CPU.
The Ethernet block and the CPU share a dedicated AHB subsystem that is used to access
the Ethernet SRAM for Ethernet data, control, and status information. All other AHB traffic
in the LPC2420/2460 takes place on a different AHB subsystem, effectively separating
Ethernet activity from the rest of the system. The Ethernet DMA can also access off-chip
memory via the EMC, as well as the SRAM located on another AHB. However, using
memory other than the Ethernet SRAM, especially off-chip memory, will slow Ethernet
access to memory and increase the loading of its AHB.
The Ethernet block interfaces between an off-chip Ethernet PHY using the Media
Independent Interface (MII) or Reduced MII (RMII) protocol and the on-chip Media
Independent Interface Management (MIIM) serial bus.
•
•
•
Ethernet standards support:
– Supports 10 Mbit/s or 100 Mbit/s PHY devices including 10 Base-T, 100 Base-TX,
– Fully compliant with IEEE standard 802.3.
– Fully compliant with 802.3x Full Duplex Flow Control and Half Duplex back
– Flexible transmit and receive frame options.
– Virtual Local Area Network (VLAN) frame support.
Memory management:
– Independent transmit and receive buffers memory mapped to shared SRAM.
– DMA managers with scatter/gather DMA and arrays of frame descriptors.
– Memory traffic optimized by buffering and pre-fetching.
Enhanced Ethernet features:
– Receive filtering.
– Multicast and broadcast frame support for both transmit and receive.
– Optional automatic Frame Check Sequence (FCS) insertion with Circular
– Selectable automatic transmit frame padding.
– Over-length frame support for both transmit and receive allows any length frames.
– Promiscuous receive mode.
– Automatic collision back-off and frame retransmission.
– Includes power management by clock switching.
100 Base-FX, and 100 Base-T4.
pressure.
Redundancy Check (CRC) for transmit.
Rev. 05 — 24 February 2010
Flashless 16-bit/32-bit microcontroller
LPC2420/2460
© NXP B.V. 2010. All rights reserved.
31 of 79