LPC2420FET208,551 NXP Semiconductors, LPC2420FET208,551 Datasheet - Page 37

• Manufacturer Part Number: LPC2420FET208,551
• Description: IC ARM7 MCU 16BIT T208FBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2420FET208,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: EBI/EMI, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Type: ROMless
• Ram Size: 82K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-TFBGA
• Processor Series: LPC2420
• Core: ARM7
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: SPI, I2C, I2S, USB, SSP
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Processor To Be Evaluated: ARM7TDMI-S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Program Memory Size: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-5216

NXP Semiconductors
LPC2420_60_5
Preliminary data sheet
7.19.1 Features
7.20.1 Features
7.20 General purpose 32-bit timers/external event counters
The I
and one word select signal. The basic I
master, and one slave. The I
transmit and receive channel, each of which can operate as either a master or a slave.
The LPC2420/2460 includes four 32-bit Timer/Counters. The Timer/Counter is designed
to count cycles of the system derived clock or an externally-supplied clock. It can
optionally generate interrupts or perform other actions at specified timer values, based on
four match registers. The Timer/Counter also includes four capture inputs to trap the timer
value when an input signal transitions, optionally generating an interrupt.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The interface has separate input/output channels each of which can operate in master
or slave mode.
Capable of handling 8-bit, 16-bit, and 32-bit word sizes.
Mono and stereo audio data supported.
The sampling frequency can range from 16 kHz to 48 kHz (16, 22.05, 32, 44.1,
48) kHz.
Configurable word select period in master mode (separately for I
output).
Two 8 word FIFO data buffers are provided, one for transmit and one for receive.
Generates interrupt requests when buffer levels cross a programmable boundary.
Two DMA requests, controlled by programmable buffer levels. These are connected
to the GPDMA block.
Controls include reset, stop and mute options separately for I
output.
A 32-bit Timer/Counter with a programmable 32-bit prescaler.
Counter or Timer operation.
Up to four 32-bit capture channels per timer, that can take a snapshot of the timer
value when an input signal transitions. A capture event may also optionally generate
an interrupt.
Four 32-bit match registers that allow:
– Continuous operation with optional interrupt generation on match.
– Stop timer on match with optional interrupt generation.
– Reset timer on match with optional interrupt generation.
Up to four external outputs corresponding to match registers, with the following
capabilities:
– Set LOW on match.
– Set HIGH on match.
– Toggle on match.
2
S-bus specification defines a 3-wire serial bus using one data line, one clock line,
Rev. 05 — 24 February 2010
2
S interface on the LPC2420/2460 provides a separate
2
S connection has one master, which is always the
Flashless 16-bit/32-bit microcontroller
LPC2420/2460
2
S-bus input and I
2
S-bus input and
© NXP B.V. 2010. All rights reserved.
2
37 of 79
S-bus