ISP1508AET NXP Semiconductors, ISP1508AET Datasheet - Page 42

no-image

ISP1508AET

Manufacturer Part Number
ISP1508AET
Description
RF Transceiver USB 2.0 ULPI TRNSCVR
Manufacturer
NXP Semiconductors
Datasheet

Specifications of ISP1508AET

Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
935283548118 ISP1508AET-T

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ISP1508AET
Manufacturer:
NXP/恩智浦
Quantity:
20 000
Part Number:
ISP1508AETT
Manufacturer:
ST
0
Part Number:
ISP1508AETTM
Quantity:
3 770
Part Number:
ISP1508AETTM
Manufacturer:
ST
Quantity:
20 000
NXP Semiconductors
ISP1508A_ISP1508B_1
Product data sheet
The sequence of events related to a host and a peripheral, both with ISP1508, is as
follows.
1. High-speed idle: Initially, the host and the peripheral are idle. The host has its 15 k
2. Full-speed suspend: When the peripheral sees no bus activity for 3 ms, it enters the
3. Resume K: When the host wants to wake up the peripheral, it sets OPMODE to 10b
4. High-speed traffic: The host link sets high-speed (XCVRSELECT is set to 00b), and
pull-down resistors enabled (DP_PULLDOWN and DM_PULLDOWN are set to 1b)
and 45
45
suspend state. The peripheral link places the ISP1508 into full-speed mode
(XCVRSELECT is set to 01b), removes 45
pull-up resistor on DP (TERMSELECT is set to 1b). The peripheral link then places
the ISP1508 into low-power mode by setting SUSPENDM, causing the ISP1508 to
draw only suspend current. The host also changes the ISP1508 to full-speed
(XCVRSELECT is set to 01b), removes 45
1b), and then may or may not be powered down.
and transmits a full-speed K for at least 20 ms. The peripheral link sees the resume K
(10b) on LINESTATE, and asserts STP to wake up the ISP1508.
enables its 45
SE0 on LINESTATE and also sets high-speed (XCVRSELECT is set to 00b), and
enables its 45
OPMODE to 00b for normal high-speed operation.
terminations enabled (TERMSELECT is set to 0b).
terminations enabled (TERMSELECT is set to 0b). The peripheral has its
terminations (TERMSELECT is set to 0b). The peripheral link sees
terminations (TERMSELECT is set to 0b). The host link sets
Rev. 01 — 14 August 2007
ISP1508A; ISP1508B
terminations, and enables the 1.5 k
terminations (TERMSELECT is set to
ULPI HS USB transceiver
© NXP B.V. 2007. All rights reserved.
42 of 86

Related parts for ISP1508AET