ISP1582BS ST-Ericsson Inc, ISP1582BS Datasheet - Page 39

• Manufacturer Part Number: ISP1582BS
• Description: IC USB CTRL HI-SPEED 56HVQFN
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1582BS

• Applications: USB Host/Peripheral Controller
• Interface: USB
• Voltage - Supply: 3 V ~ 3.6 V
• Package / Case: 56-VQFN Exposed Pad, 56-HVQFN, 56-SQFN, 56-DHVQFN
• Mounting Type: Surface Mount
• For Use With: ISP1582 PCI EVALKIT - PCI BUS EVAL KIT ISP1582
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
AN10039_4
Application note
Fig 24. Handling ATA REQUEST_SENSE
Write these values to the Data Port register:
0x00, 0x00, 0x00, 0x00, 0x0A, 0x00, 0x00,
Initialize the Endpoint Index register to the
0x70, 0x00, Error_Code.SENSE_KEY,
Validate the buffer using the Control
CBW.dCBWDataTransferLength
0x00, 0x00,Error_Code.ASC,
Function register bit VENDP
Byte_Transfered_Count =
0x00, 0x00, 0x00, 0x00
respective IN endpoint
Error_Code.ASCQ,
Start
Stop
Fig 23. Handling ATA READ_FORMAT_CAPACITIES
Rev. 04 — 21 December 2006
0x00, 0x00, 0x00, 0x08, Drive_Setup.LBA[0-3],
Initialize the Endpoint Index register to the
Buffer Length LSB Task File register = 12
Buffer Length MSB Task File register = 0
Write these values to Data Port register
Prev_State = ATAPI_status phase
In the 8-bit mode, write to the LSB and
then the MSB of the Data Port register
Byte_Transfered_Count = 12
Set Transfer_Error flag
0x00, 0x00,0x02, 0x00
respective IN endpoint
Start
Stop
ISP1582/83 Firmware Programming Guide
AN10039
© NXP B.V. 2006. All rights reserved.
38 of 49