M68EVB908GB60E Freescale Semiconductor, M68EVB908GB60E Datasheet - Page 233

• Manufacturer Part Number: M68EVB908GB60E
• Description: BOARD EVAL FOR MC9S08GB60
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of M68EVB908GB60E

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MC9S08GB
• Data Bus Width: 8 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08GB
• Kit Contents: GB60 Evaluation Kit
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08GB60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CCF — Conversion Complete Flag
ATDIE — ATD Interrupt Enabled
ATDCO — ATD Continuous Conversion
ATDCH — Analog Input Channel Select
Freescale Semiconductor
The CCF is a read-only bit which is set each time a conversion is complete. The CCF bit is cleared
whenever the ATD1SC register is written. It is also cleared whenever the result registers, ATD1RH or
ATD1RL, are read.
When this bit is set, an interrupt is generated upon completion of an ATD conversion. At this time, the
result registers contain the result data generated by the conversion. The interrupt will remain pending
as long as the conversion complete flag CCF is set. If the ATDIE bit is cleared, then the CCF bit must
be polled to determine when the conversion is complete. Note that system reset clears pending
interrupts.
When this bit is set, the ATD will convert samples continuously and update the result registers at the
end of each conversion. When this bit is cleared, only one conversion is completed between writes to
the ATD1SC register.
This field of bits selects the analog input channel whose signal is sampled and converted to digital
codes.
1 = Current conversion is complete.
0 = Current conversion is not complete.
1 = ATD interrupt enabled.
0 = ATD interrupt disabled.
1 = Continuous conversion mode.
0 = Single conversion mode.
Table 14-5
lists the coding used to select the various analog input channels.
Table 14-5. Analog Input Channel Select Coding
ATDCH
08–1D
1E
1F
00
01
02
03
04
05
06
07
MC9S08GB/GT Data Sheet, Rev. 2.3
Reserved (default to V
Analog Input Channel
V
V
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
REFH
REFL
REFL
)
ATD Registers and Control Bits
233