ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 75

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

PS024410-0108
T16_OUT
Caution:
T16 DEMODULATION Mode
You can modify the values in TC16H and TC16L at any time. The new values take effect
when they are loaded.
You must program TC16L and TC16H to
(rising, falling, or both depending on CTR1 bits [5:4]) is detected, T16 captures HI16 and
LO16, reloads, and begins counting.
If Bit 6 of CTR2 Is 0—
CTR1 bits [5:4]) is detected during counting, the current count in T16 is complemented
and put into HI16 and LO16. When data is captured, one of the edge detect status bits
Do not load these registers at the time the values are to be loaded into the counter/timer
to ensure known operation. An initial count of 1 is not allowed. An initial count of 0
causes T16 to count from 0 to
dition.
Counter Enable command,
T16_OUT, switches to its
initial value (CTR1 data bit 0)
TC16H * 256 + TC16L
Figure 28. T16_OUT in MODULO-N Mode
Counter Enable command,
T16_OUT, switches to its
initial value (CTR1 data bit 0)
Figure 27. T16_OUT in SINGLE-PASS Mode
When a subsequent edge (rising, falling, or both depending on
P R E L I M I N A R Y
FFFEh
T16_OUT toggles,
Time-out interrupt
TC16H * 256 + TC16L Counts
. Transition from 0 to
FFh
. After T16 is enabled, and the first edge
TC16H * 256 + TC16L
FFFFh
T16_OUT toggles,
Time-out interrupt
Product Specification
T16_OUT toggles,
Time-out interrupt
is not a time-out con-
TC16H * 256 + TC16L
Timers
69