PIC24HJ64GP502-E/MM Microchip Technology, PIC24HJ64GP502-E/MM Datasheet - Page 163

• Manufacturer Part Number: PIC24HJ64GP502-E/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-E/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

13.0
Timer2 and Timer4 are Type B timers with the following
specific features:
FIGURE 13-1:
FIGURE 13-2:
© 2009 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
TIMER2/3 AND TIMER4/5
FEATURE
TxCK
of
PIC24HJ64GPX02/X04
PIC24HJ128GPX02/X04
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 11. “Timers”
(DS70244) of the “dsPIC33F/PIC24H
Family Reference Manual”, which is avail-
able
(www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
TxCK
from
the
TYPE B TIMER BLOCK DIAGRAM (x = 2 or 4)
TYPE C TIMER BLOCK DIAGRAM (x = 3 or 5)
F
CY
Sync
TCKPS<1:0>
the
Prescaler
PIC24HJ32GP302/304,
F
(/n)
CY
Microchip
TCKPS<1:0>
TCKPS<1:0>
Prescaler
Prescaler
Prescaler
TCKPS<1:0>
Gate
Sync
(/n)
(/n)
Sync
Gate
Sync
families
(/n)
website
and
Preliminary
of
Falling Edge
Falling Edge
TGATE
Detect
Detect
TGATE
TCS
TCS
• A Type B timer can be concatenated with a Type
• The external clock input (TxCK) is always
A block diagram of the Type B timer is shown in
Figure 13-1.
Timer3 and Timer5 are Type C timers with the following
specific features:
• A Type C timer can be concatenated with a Type
• At least one Type C timer has the ability to trigger
• The external clock input (TxCK) is always
A block diagram of the Type C timer is shown in
Figure 13-2.
10
00
x1
C timer to form a 32-bit timer
synchronized to the internal device clock and the
clock synchronization is performed after the
prescaler
B timer to form a 32-bit timer
an A/D conversion
synchronized to the internal device clock and the
clock synchronization is performed before the
prescaler
10
00
x1
Comparator
Comparator
TMRx
PRx
TMRx
PRx
Equal
Equal
Reset
Reset
ADC SOC Trigger
TGATE
TGATE
1
0
1
0
Set TxIF flag
Set TxIF flag
DS70293D-page 163